[mrtg] RATEUP died

[Bodor Otto]

Hello,

after I have installed the ActivePerl 5.22 and mrtg 2.8.12 on Windows NT and
created the config file mrtg.cfg by cfgmaker I ran the mrtg:

C:\Program Files\mrtg-2.8.12\run>perl mrtg mrtg.cfg

and got these error messages:

The name specified is not recognized as an
internal or external command, operable program or batch file.
	
PROBLEM: rateup died from Signal 0
 with Exit Value 1 when doing router 'x.x.x.x.1'
 code was 256, retcode was No such file or directory. If this happens all
the time,
 you should probably investigate the cause. :-)
	
The name specified is not recognized as an
internal or external command, operable program or batch file.

PROBLEM: rateup died from Signal 0
 with Exit Value 1 when doing router 'x.x.x.x.3'
 code was 256, retcode was No such file or directory. If this happens all
the time,
 you should probably investigate the cause. :-)

I have checked location of the rateup.exe. It was in the mrtg run directory.

This is my mrtg.cfg file:

WorkDir:\temp\mrtg

Target[x.x.x.x.1]: 1:public at x.x.x.x
MaxBytes[x.x.x.x.1]: 8000
Title[x.x.x.x.1]: (No hostname defined for IP address): Serial0
PageTop[x.x.x.x.1]: <H1>Traffic Analysis for Serial0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>INTERNET1 in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>Serial0 (1)</TD></TR>
   <TR><TD>IP:</TD><TD>No hostname defined for IP address
(212.5.209.206)</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>8000.0 Bytes/s (ppp)</TD></TR>
  </TABLE>

Target[x.x.x.x.3]: 3:public at x.x.x.x
MaxBytes[x.x.x.x.3]: 2000000
Title[x.x.x.x.3]: (No hostname defined for IP address): TokenRing0
PageTop[x.x.x.x.3]: <H1>Traffic Analysis for TokenRing0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>INTERNET1 in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>TokenRing0 (3)</TD></TR>
   <TR><TD>IP:</TD><TD>No hostname defined for IP address
(x.x.x.x)</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>2000.0 kBytes/s (iso88025TokenRing)</TD></TR>
  </TABLE>

Would you please help me with this problem.
Thank you in advance

Otto Bodor
obodor at vub.sk <mailto:obodor at vub.sk>  


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi