[mrtg] Re: FW: change the unit of y-anix

Shao Qun shao at mtcg.co.jp
Fri Jul 28 03:48:24 MEST 2000


thanks a lot for help.

it is ok that the history will continue to show the usage is increasing.

what i want is just let the bandwidth disappear.

can you tell me the method more in detail?

I put the "dorelpercent" (rate of in and out) into effect and now
the another side of y-axis is with the unit of Percentage,
but the unit of bandwidth still exists.


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Henry Steinhauer
Sent: Friday, July 28, 2000 10:20 AM
To: Shao Qun
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: FW: change the unit of y-anix





I know that you really want to show Percentage,

BUT -   When you upgrade the line, the percentage will drop again and this
will
really not show your history.

It is far better to put a 'red line ' at the level of Bytes / Bits that you
want.

You can put the 'red line' on the graph by using the MaxBytes value as the
red
line and then the AbsMax for the limit on your byte count.

Thus you will need to adjust the Max Bytes and AbsMax when you upgrade, but
at
least your history will continue to show your increased usage.

Henry Steinhauer





From: "Shao Qun" <shao at mtcg.co.jp> on 07/27/2000 07:19 PM

To:   mrtg at list.ee.ethz.ch
cc:
Client:
Subject:  [mrtg] FW: change the unit of y-anix




hello, again.

I am using mrtg to monitor the traffic of
router , How can I change the unit of y-axis
from bandwidth to the percentage.
I have completed the manual reading by myself
but can not get the answer.

the mrtg system is on Windows NT and
it looks like those lines below,

Target[XXX.XXX.XXX.XXX.XXX]: XXX:public at XXX.XXX.XXX.XXX
MaxBytes[XXX.XXX.XXX.XXX.XXX]: 768000
Options[XXX.XXX.XXX.XXX.XXX]: Bits
Title[XXX.XXX.XXX.XXX.XXX]: YYYYYYYYYY (XXX.XXX.XXX.XXX.XXX): Serial6/0/0
PageTop[XXX.XXX.XXX.XXX.XXX]: <H1>Traffic Analysis for Serial6/0/0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>XXXXXXXXXXXXXXXXX </TD></TR>
   <TR><TD>Maintainer:</TD><TD>XXXXXXXXXXXX</TD></TR>
   <TR><TD>Interface:</TD><TD>Serial6/0/0 (XXX)</TD></TR>
   <TR><TD>IP:</TD><TD></TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>6.144MBytes/s (frame-relay)</TD></TR>
  </TABLE>

thanks for help ahead.


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Shao Qun
Sent: Thursday, July 27, 2000 10:22 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] change the unit of y-anix



hello,

I am using mrtg to monitor the traffic of
router , I want to change the unit of y anix
form bandwidth to the percentage.

the mrtg system is on Windows NT and
it looks like those lines below,

Target[XXX.XXX.XXX.XXX.XXX]: XXX:public at XXX.XXX.XXX.XXX
MaxBytes[XXX.XXX.XXX.XXX.XXX]: 768000
Options[XXX.XXX.XXX.XXX.XXX]: Bits
Title[XXX.XXX.XXX.XXX.XXX]: YYYYYYYYYY (XXX.XXX.XXX.XXX.XXX): Serial6/0/0
PageTop[XXX.XXX.XXX.XXX.XXX]: <H1>Traffic Analysis for Serial6/0/0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>XXXXXXXXXXXXXXXXX </TD></TR>
   <TR><TD>Maintainer:</TD><TD>XXXXXXXXXXXX</TD></TR>
   <TR><TD>Interface:</TD><TD>Serial6/0/0 (XXX)</TD></TR>
   <TR><TD>IP:</TD><TD></TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>6.144MBytes/s (frame-relay)</TD></TR>
  </TABLE>

thanks for help ahead.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi








--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list