[mrtg] Re: Bay Router CPU Utilization

[Repucci, John (STP)]

Here are the Nortel / Bay MIB titles and the gets from a BLN, a multi-slot
router:

STP-GDT-BCN>get wfResourceTotalEntry.2.*
wfResourceTotalEntry.wfResourceTotalCpuUsed.2 = 174736491
wfResourceTotalEntry.wfResourceTotalCpuUsed.3 = 105560888
wfResourceTotalEntry.wfResourceTotalCpuUsed.4 = 143427965
wfResourceTotalEntry.wfResourceTotalCpuUsed.5 = 41154215

STP-GDT-BCN>get wfResourceTotalEntry.3.*
wfResourceTotalEntry.wfResourceTotalCpuIdle.2 = 1721855537
wfResourceTotalEntry.wfResourceTotalCpuIdle.3 = -2023773162
wfResourceTotalEntry.wfResourceTotalCpuIdle.4 = 1632820316
wfResourceTotalEntry.wfResourceTotalCpuIdle.5 = 1130682198

STP-GDT-BCN>get wfResourceTotalEntry.4.*
wfResourceTotalEntry.wfResourceTotalCpuMax.2 = 1896596878
wfResourceTotalEntry.wfResourceTotalCpuMax.3 = -1918207423
wfResourceTotalEntry.wfResourceTotalCpuMax.4 = 1776253146
wfResourceTotalEntry.wfResourceTotalCpuMax.5 = 1171841263

The following is the MIB tree for one slot ( in this case, slot 2 ):

STP-GDT-BCN>get wfResourceTotalEntry.*.2
wfResourceTotalEntry.wfResourceTotalSlot.2 = 2
wfResourceTotalEntry.wfResourceTotalCpuUsed.2 = 174738872
wfResourceTotalEntry.wfResourceTotalCpuIdle.2 = 1721887301
wfResourceTotalEntry.wfResourceTotalCpuMax.2 = 1896626173
wfResourceTotalEntry.wfResourceTotalMemoryUsed.2 = 2971456
wfResourceTotalEntry.wfResourceTotalMemoryFree.2 = 19808736
wfResourceTotalEntry.wfResourceTotalMemoryMax.2 = 22780192
wfResourceTotalEntry.wfResourceTotalBuffersUsed.2 = 672
wfResourceTotalEntry.wfResourceTotalBuffersFree.2 = 855
wfResourceTotalEntry.wfResourceTotalBuffersMax.2 = 1527   


John Repucci
Guidant Corp.


> -----Original Message-----
> From:	Andrew Staples [SMTP:andrews at ltinet.net]
> Sent:	Tuesday, March 07, 2000 8:35 PM
> To:	mrtg at list.ee.ethz.ch
> Subject:	[mrtg] Re: Bay Router CPU Utilization
> 
> 
> 1.3.6.1.4.1.18.3.3.2.5.7.1.4 = TotalCpuMax
> 1.3.6.1.4.1.18.3.3.2.5.7.1.2= TotalCpuUsed
> 1.3.6.1.4.1.18.3.3.2.5.7.1.3=TotalCpuIdle (same as 1.4 - 1.2)
> 
>  You should divide 1.2 by 1.4 to get % utilization
> 
> Andrew
> 
> > ----- Original Message -----
> > From: Patacsil, Wilson "Jun" <WAPatacsil at piltel.net.ph>
> > Hi
> >
> > Could you guys please check my config I'm getting 100% utilization in
> all
> > my
> > router all the time.
> >
> > # Router CPU load %
> > Target[x.x.x.x.cpu]:
> >
>  
> 1.3.6.1.4.1.18.3.3.2.5.7.1.4.1&1.3.6.1.4.1.18.3.3.2.5.7.1.4.1:public at x.x.x
> .x
> > RouterUptime[x.x.x.x.cpu]: public at x.x.x.x <mailto:public at x.x.x.x>
> 
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
> Archive     http://www.ee.ethz.ch/~slist/mrtg

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg