[mrtg] new unusual problem (technical)

[Dick]

Please advise.  This is an upgrade from 2.8.12 to 2.9.4 and this was 
working before the upgrade.  (BTW: MRTG ROCKS!)

Anyway:

noc:~/dynamic$ /usr/local/mrtg-2/bin/mrtg tc2.cfg
Error:
   can't resolve "" to IP address
SNMPGET Problem for

...tc2.cfg start...
WorkDir: /home/mrtg/web/modems
icondir: /icons
#NoMib2: Yes
Interval: 5
Refresh: 600

Target[tc2.ports]: `/home/mrtg/countformat 
/home/mrtg/modemcounts/wausau-tc2 /home/mrtg/history/tc2 /tc2`
Title[tc2.ports]: Modem Traffic for tc2
MaxBytes[tc2.ports]: 168
AbsMax[tc2.ports]: 168
XSize[tc2.ports]: 380
Options[tc2.ports]: absolute, gauge, growright
Ylegend[tc2.ports]: tc2
RouterUptime[tc2.ports]:
ShortLegend[tc2.ports]: Modems
Unscaled[tc2.ports]: dwmy
WithPeak[tc2.ports]: wmy
PageTop[tc2.ports]: <center><B>Modem Traffic for tc2 (168 max)</B>
...tc2.cfg end...

noc:~/dynamic$ /home/mrtg/countformat /home/mrtg/modemcounts/wausau-tc2 
/home/mrtg/history/tc2 /tc2
132
138
0
0

I know 132, 138, 0, 0 isn't exactly what should be returned but it should 
work and has always on older versions.  I would be open for advice as to 
what better data it should return instead of the last two zeros.  Also the 
line:
`/home/mrtg/countformat /home/mrtg/modemcounts/wausau-tc2 
/home/mrtg/history/tc2 /tc2`
is all on one in the config file.

If I replace the long `line` with `cat /tmp/tmp.txt` and /tmp/tmp.txt has 
data in it is still acts the same.

NOTE: It does make graphs anyway but it takes a while and sends all kinds 
of messages every 5 minutes....  :-(


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi