[mrtg] Cisco7500 ATM PVC SubInterfaces

[Gabriel]

Im trying to graph the Bandwith Usage of my ATM Subinterfaces on my
Cisco 7500 (IOS 12.0.(9))
Cfgmaker was unable to catch any of these sub-interfaces (up to 32 of
them ATM1/1/0.20......ATM1/1/0.52) well in fact It did once
but only one interface and it showed up like this:

########
######## This Interface is one of the following
######## - administratively not UP
######## - it is in test mode
######## - it is a softwareLoopback interface
######## - has a unrealistic speed setting
######## It is commented out for this reason.
########
#
# Target[.]: 20:public at 10.7.2.1
# MaxBytes[.]: 0
# Title[.]: CISCO7500 (): ATM1/1/0-atm layer
# PageTop[.]: <H1>Traffic Analysis for ATM1/1/0-atm layer
#  </H1>
#  <TABLE>
#    <TR><TD>System:</TD><TD>CISCO7500</TD></TR>
#    <TR><TD>Maintainer:</TD><TD>NOC></TD></TR>
#    <TR><TD>Interface:</TD><TD>ATM1/1/0-atm layer (20)</TD></TR>
#    <TR><TD>IP:</TD><TD> ()</TD></TR>
#    <TR><TD>Max Speed:</TD>
#        <TD>0.0 Bytes/s (atm)</TD></TR>
#   </TABLE>
#

I found an OID for InPkts and InOctets

            snmpwalk  10.7.2.1 public .1.3.6.1.4.1.9.9.66.1.1.1.1.1
(InPkts)

.1.1.1.1.2 (OutPkts)

.1.1.1.1.3(InOctets)

.1.1.1.1.4(OutOctets)

But Im not sure how to setup de *mrtg.cfg file and which any of these
OiDs should I use? In/OutPkts or In/OutOctets?????
Are these the correct OIDs for monitoring Bandwith Utilization on ATM
PVCs? Anyone knows a better way?
What kind of Options do I have to use? Bits,gauge, unknaszero..???
Is there anyone who can send me please an Example file, Im getting real
nuts with this.


                                    Thanks in advance.  Gabriel


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi