[mrtg] Catalyst 6509

Leddy mrtg at artica.net
Thu Jan 25 03:26:01 MET 2001


I have a Catalyst 6509 switch. When I run cfgmaker it outputs all the information and everything works great. The problem I have run into is that cfgmaker only see's my VLAN's. I'd like to graph bytes sent/received on a per port basis. Here is the results of my findings.

snmpwalk of .1.3.6.1.2.1.2.2.1.10 shows:
interfaces.ifTable.ifEntry.ifInOctets.2 = 0
interfaces.ifTable.ifEntry.ifInOctets.3 = 610447559
interfaces.ifTable.ifEntry.ifInOctets.4 = 597971294
interfaces.ifTable.ifEntry.ifInOctets.5 = 31773126
interfaces.ifTable.ifEntry.ifInOctets.6 = 31753842
interfaces.ifTable.ifEntry.ifInOctets.7 = 0
These are my VLANS.

I generated a text file by walking from .1  I picked through it and the only thing I could see that even remotely looked like what I wanted was this.
at.atTable.atEntry.atIfIndex.3.1.172.24.150.18 = 3
at.atTable.atEntry.atPhysAddress.3.1.172.24.150.18 =  Hex: 00 01 02 CC A6 3A 
at.atTable.atEntry.atNetAddress.3.1.172.24.150.18 = IpAddress: 172.24.150.18
ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex.3.172.24.150.18 = 3
ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress.3.172.24.150.18 = 0:1:2:cc:a6:3a
ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress.3.172.24.150.18 = IpAddress: 172.24.150.18
ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType.3.172.24.150.18 = dynamic(3)

It looks as though it has some information on ports referenced by the IP address attached to them. This is a valid IP on my network. Even such it would be virtually impossible to get device information based on knowing the IP attached to it. As it may be this was the only thing I could find. No reference to bandwidth utilization. Any information you guys can give?

This is the information from a sh ver
WS-C6509 Software, Version NmpSW: 5.5(2)
Copyright (c) 1995-2000 by Cisco Systems
NMP S/W compiled on Jul 28 2000, 17:44:05

System Bootstrap Version: 5.3(1)
System Web Interface Version: Engine: 5.1 ADP device: Cat6000 ADP Version: 1.3 ADK: 33

Hardware Version: 2.0  Model: WS-C6509  

Any help would be greatly appreciated.... I am at my whits end on this one.

Leddy

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list