[mrtg] Error Line 11 <workdir d:\inetpub\mrtg\data > in cfg file < mrtg.cfg > does not make sense

[Jon]

  Hello,

  I just installed MRTG on Win2K and am getting an error when I start it

  Mrtg is located at - d:\inetpub\mrtg and my working dir is
  d:\inetpub\mrtg\data.

  When I enter perl mrtg mrtg.cfg from a command line in d:\inetpub\mrtg\bin
  it get -

  Error Line 11 <workdir d:\inetpub\mrtg\data > in cfg file < mrtg.cfg >
  does not make sense.

  Sorry - but I could not find anything on any of the FAQ sites in this one.

  Please advise what I did wrong or if you know of someone I can ask this
  question of.

  Many thanks

  Cheers,

  Jon Unglert
  Ix Technologies, Inc.


CURRENT CONFIGURATION FILE FOLLOWS - - - -

# Created by
# cfgmaker netrz at 65.105.251.1 --global 'WorkDir d:\inetpub\mrtg' --output
mrtg.cfg

### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
   WorkDir: D:\InetPub\MRTG\Data

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System:
# Description: RS 8600 - Riverstone Networks Firmware Version: 6.3.2.C05
PROM Version: prom-2.0.1.1
# Contact:
# Location:
######################################################################

### Interface 6 >> Descr: 'Physical port: et.12.2' | Name: 'et.12.2' | Ip:
'' | Eth: '' ###

Target[65.105.251.1_6]: 6:netrz at 65.105.251.1:
SetEnv[65.105.251.1_6]: MRTG_INT_IP="" MRTG_INT_DESCR="Physical port:
et.12.2"
MaxBytes[65.105.251.1_6]: 12500000
Title[65.105.251.1_6]: Traffic Analysis for 6 --
PageTop[65.105.251.1_6]: <H1>Traffic Analysis for 6 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Physical port: et.12.2  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>et.12.2</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
 </TABLE>


### Interface 19 >> Descr: 'Physical port: et.12.15' | Name: 'et.12.15' |
Ip: '' | Eth: '' ###

Target[65.105.251.1_19]: 19:netrz at 65.105.251.1:
SetEnv[65.105.251.1_19]: MRTG_INT_IP="" MRTG_INT_DESCR="Physical port:
et.12.15"
MaxBytes[65.105.251.1_19]: 12500000
Title[65.105.251.1_19]: Traffic Analysis for 19 --
PageTop[65.105.251.1_19]: <H1>Traffic Analysis for 19 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Physical port: et.12.15  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>et.12.15</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
 </TABLE>

### Interface 46 >> Descr: 'PPP: t3.14.1' | Name: '' | Ip: '' | Eth: '' ###

Target[65.105.251.1_46]: 46:netrz at 65.105.251.1:
SetEnv[65.105.251.1_46]: MRTG_INT_IP="" MRTG_INT_DESCR="PPP: t3.14.1"
MaxBytes[65.105.251.1_46]: 5592000
Title[65.105.251.1_46]: Traffic Analysis for 46 --
PageTop[65.105.251.1_46]: <H1>Traffic Analysis for 46 -- </H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD> in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>PPP: t3.14.1  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ppp (23)</TD></TR>
   <TR><TD>ifName:</TD>     <TD></TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>5592.0 kBytes/s</TD></TR>
 </TABLE>



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi