[mrtg] Re: Fw: Re: OID'S CISCO ROUTER 3640

[Erik Solis]

Hi, I got it working thank you everybody, just one last thing, how do I make
MRTG to add incoming and outgoing traffic in a single peak like my graphic
used to be? if you guys have time to look at it this is the address:

http://firewall.pvnet.com.mx/mrtg/uninetall/

That way I can get to know exactly how much of my bandwith is in use.

YOurs truly,

Erik Christopher Solis
Manager, Internet Services
PVNet S.A. de C.V.
Telefono & Fax: 52 (3) 223-1127
E-mail: erik.solis at pvnet.com.mx
http://www.pvnet.com.mx
Puerto Vallarta Jal, Mexico




----- Original Message -----
From: "Erik Solis" <erik.solis at pvnet.com.mx>
To: <mrtg at list.ee.ethz.ch>
Sent: Friday, July 20, 2001 1:56 PM
Subject: [mrtg] Fw: Re: OID'S CISCO ROUTER 3640



 Bob,

  Thank you very much for the info, I have the cpu and memory up and
 running Just have a bit problem with the bandwith matter, I need to know
the
 index
  for my serial interface which does not appears on your list, I attached my
  E1 controller configuration and Serial Interface Config.


  controller E1 0/0
  framing NO-CRC4
  channel-group 1 timeslots 1-31
  description conexion a Uninet

  interface Serial0/0:1
  description Conexion a Uninet
  bandwidth 1984
  ip address 207.248.130.113 255.255.255.252
  no ip directed-broadcast
  ip nat outside
  encapsulation frame-relay
  frame-relay map ip 207.248.130.114 28 broadcast
  frame-relay interface-dlci 28
  frame-relay lmi-type ansi


 Yours truly,

  Erik Christopher Solis
  Manager, Internet Services
  PVNet S.A. de C.V.
  Telefono & Fax: 52 (3) 223-1127
  E-mail: erik.solis at pvnet.com.mx
  http://www.pvnet.com.mx
  Puerto Vallarta Jal, Mexico
>
>



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi