[mrtg] Cat 4003 temperature mibs

[Garnel, Eric]

Today is my day for posting in the mrtg group!

I ran the following script using "popular" temp mibs for Cisco, but
unfortunately they are not accurate for the 4003 catalyst switch series.
They [mibs] do not return a value in getif or WS ping pro pak. I have also
been unsuccessful in my search on Cisco's MIB page. 

I would greatly appreciate it if someone out there wouldn't mind sharing
this rare MIB with me


Target[192.168.38.8]:.1.3.6.1.4.1.9.9.13.1.3.1.3.1&.1.3.6.1.4.1.9.9.13.1.3.1
.3.4:xxxxxxxxxxxx at 192.168.38.8* 1.8 + 32
PageTop[192.168.38.8]: <h1>frontend 4003 A switch Temp</h1>
WithPeak[192.168.38.8]: wmy
YLegend[192.168.38.8]: Degrees F
ShortLegend[192.168.38.8]: &deg;f
MaxBytes[192.168.38.8]: 200
Options[192.168.38.8]: nopercent, gauge,growright
Unscaled[192.168.38.8]: dwmy
AbsMax[192.168.38.8]: 200
Title[192.168.38.8]: '192.168.38.8 (4003A) Temp'
Colours[192.168.38.8]:GREEN#00eb0c,BLUE#1000ff,BLUE#1000ff,VIOLET#ff00ff
Legend1[192.168.38.8]: Average 1 minute Inlet Temperature
Legend2[192.168.38.8]: Average 1 minute Outlet Temperature
Legend3[192.168.38.8]: Average 5 minute Inlet Temperature
Legend4[192.168.38.8]: Average 5 minute Outlet Temperature
LegendI[192.168.38.8]: &nbsp;Inlet:
LegendO[192.168.38.8]: &nbsp;Outlet:

Thank you,
Eric Garnel
Network Engineer CCNA, MCSE
Question Technologies
Turning Questions into Commerce

701 Brazos Street, Suite 1200
Austin, TX 78701
512/391-4120 direct
512/480-9136 fax
egarnel at question.com
http://www.question.com/ <http://www.question.com/> 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi