[mrtg] Re: need help with config problem...

Dave Jones DJones at TheFund.com
Tue Mar 27 16:57:22 MEST 2001


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I don't see where they get 3.5mbps according to your graph.  However,
to make things a little easier for you, you might want to have your
graph display bits instead of bytes.  Sure you can always do the math
but if your graphing in bits, all it takes is a glance.  Do a
Options[InterNap_1]: bits to change it to bits.  Sorry this doesn't
help with your real problem.

Dave

- -----Original Message-----
From: Edward Kuhner [mailto:ekuhner-list at powerit-up.com]
Sent: Tuesday, March 27, 2001 9:45 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] need help with config problem...



Hello All,

I have something funny going on here, and I need some help in
figuring out
what is going on...

Our upstream provider is telling me that we are peaking at over 3.5
Mbps on
our link to them, and my graphs are showing something completely
different.

We have a Cabletron SSR 2000, which has 16 routed Ethernet ports.  1
of
these is a 100Mb connection to InterNap, our upstream provider.

Here is the config I have in MRTG, and a link to a copy of the
page/graph it
creates
http://www.powerit-up.com/temp/internap_1.html

### InterNAP link 1
Target[InterNap_1]: 1:public at 64.253.64.1
SetEnv[InterNap_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Physical port:
et.1.1"
MaxBytes[InterNap_1]: 125000000
Title[InterNap_1]: Traffic Analysis for InterNap - Link 1
PageTop[InterNap_1]: <H1>Traffic Analysis for InterNap - Link 1</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>PWR-INAP-SSR in </TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>InterNap Port 1</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>et.1.1</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>125 MBytes/s</TD></TR>
 </TABLE>

Why is this graph only showing 120 kBytes max?  If the ISP says we
are using
over 3.5 Mbps?

Is something wrong in my configuration???

Thanks!!!

Edward Kuhner
PowerIT-Up
www.powerit-up.com
ekuhner at powerit-up.com
ph 713.339.3115
fx 713.952.9943


- --
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com>

iQA/AwUBOsCpgcrqAtK1r2jWEQKfCACeNIgbdpGdg82198AffD1SY78hkHYAoMSp
bFzx5I/ysgYZhTBK7uxz/vzc
=dYwW
-----END PGP SIGNATURE-----

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list