[mrtg] Re: Getting the basics on Target [help]

[C.Prickaerts at UB.UNIMAAS.NL]

Hi Kamran,

This one's easy I think.

Edit your mrtg.cfg and Add '0' 's to the end. These are called instances.
When you snmpwalk you get these > I get .iso.3.6.1.4.1.2620.1.1.4.0 <-- =
891760
If you would have several network cards you'd have several instances (0 , 1
, 2 etc)


> When I do an snmpwalk for FW Accepted and FW Dropped using
> snmpwalk ip-addr public .1.3.6.1.4.1.2620.1.1.4
> I get .iso.3.6.1.4.1.2620.1.1.4.0 = 891760
> 
> snmpwalk ip-addr public .1.3.6.1.4.1.2620.1.1.6
> I get .iso.3.6.1.4.1.2620.1.1.6.0 = 5452202
> 
> I have the following line in my .cfg file for Target
> 
> Target[141.207.251.26_1]:
> 1.3.6.1.4.1.2620.1.1.4&1.3.6.1.4.1.2620.1.1.6:public at 141.207.251.26:
> 
> But it doesn't seem to like the two OIDs separated by '&'. I 
> looked at the
> documentation and this should work. Any help will be greatly 
> appreciated. 
> 
> Here is the error I am getting
> 
> C:\MRTG-2~1.12A\bin>perl mrtg bla.cfg
> 2001-05-22 13:12:49 -- SNMP Error:
> Received SNMP response with error code
>   error status: noSuchName
>   index 1 (OID: 1.3.6.1.4.1.2620.1.1.4)
> SNMPv1_Session (remote host: "141.207.251.26" [141.207.251.26].161)
>                   community: "public"
>                  request ID: 1776583550
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi