[mrtg] Weird Things when polling pix 535's

[Poetzel, Christopher J.]

Hello all,
 
I have searched the archives for on this problem but have not seen anything
like this.
We have 2 pix 535's in running in a current/failover status.  6.1(3) code.
 
I can successfully do snmpwalks on each firewall.
Current
 
$ snmpwalk x.x.x.x xxxxx ifindex
interfaces.ifTable.ifEntry.ifIndex.1 = 1
interfaces.ifTable.ifEntry.ifIndex.2 = 2
interfaces.ifTable.ifEntry.ifIndex.3 = 3
interfaces.ifTable.ifEntry.ifIndex.4 = 4
interfaces.ifTable.ifEntry.ifIndex.5 = 5
interfaces.ifTable.ifEntry.ifIndex.6 = 6
interfaces.ifTable.ifEntry.ifIndex.7 = 7
interfaces.ifTable.ifEntry.ifIndex.8 = 8
interfaces.ifTable.ifEntry.ifIndex.9 = 9
interfaces.ifTable.ifEntry.ifIndex.10 = 10
 
Standby
$ snmpwalk x.x.x.x xxxxx ifindex
interfaces.ifTable.ifEntry.ifIndex.1 = 1
interfaces.ifTable.ifEntry.ifIndex.2 = 2
interfaces.ifTable.ifEntry.ifIndex.3 = 3
interfaces.ifTable.ifEntry.ifIndex.4 = 4
interfaces.ifTable.ifEntry.ifIndex.5 = 5
interfaces.ifTable.ifEntry.ifIndex.6 = 6
interfaces.ifTable.ifEntry.ifIndex.7 = 7
interfaces.ifTable.ifEntry.ifIndex.8 = 8
interfaces.ifTable.ifEntry.ifIndex.9 = 9
interfaces.ifTable.ifEntry.ifIndex.10 = 10
 
However, when I try to run cfgmaker, 
 
The cfg file for the failover pix works fine.
The cfgmaker process for the working pix hangs.
 
Using some debugging I get this result
 
$ cfgmaker xxxxxx at x.x.x.x
--base: Get Device Info on xxxx at x.x.x.x:
--base: Vendor Id: cisco
--base: Populating confcache
 
Has anyone had a problem like this before or any ideas.
 
I created a cfg file for the working pix by hand and tried run the mrtg
Command on it but it hung as well.
 
Thanks,
 
Chris Poetzel
Argonne National Labratory
Network Engineer
CCNA
 
630-252-7431
cpoetzel at anl.gov
 


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi