[mrtg] Can't monitor I/O bits per sec on Cisco switches (5500 & 6506)? P lease assist

[Perkins, Greg]

I am unable to monitor the I/O bits per second on any of VLANs on our Cisco
Switches (Cat 5500 and 6506).  When I created the a mrtg.cfg file the VLAN
interfaces are commented out.  I am not sure why.  Can you monitor VLANs on
a switch? Any help would be greatly appreciated.  Please see the "snip" of
my mrtg.cfg file.

Thanks Again,


### Interface 2 >> Descr: 'Vlan1' | Name: 'Vl1' | Ip: '10.10.10.2' | Eth: ''
###
### The following interface is commented out because:
### * it is a cisco VLAN interface
# 
# Target[10.254.9.4_10.10.10.2]: /10.10.10.2:public at 10.254.9.4:
# SetEnv[10.254.9.4_10.10.10.2]: MRTG_INT_IP="10.10.10.2"
MRTG_INT_DESCR="Vlan1"
# MaxBytes[10.254.9.4_10.10.10.2]: 12500000
# Title[10.254.9.4_10.10.10.2]: Vlan1 -- ODN-WCAT55-RSM
# PageTop[10.254.9.4_10.10.10.2]: <H1>Vlan1 -- ODN-WCAT55-RSM</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>ODN-WCAT55-RSM in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Vlan1 ODN-Wcat55 to ODN-Bcat55 </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Vl1</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>10.10.10.2 ()</TD></TR>
#  </TABLE>


### Interface 3 >> Descr: 'Vlan2' | Name: 'Vl2' | Ip: '10.10.10.3' | Eth: ''
###
### The following interface is commented out because:
### * it is a cisco VLAN interface
# 
# Target[10.254.9.4_10.10.10.3]: /10.10.10.3:public at 10.254.9.4:
# SetEnv[10.254.9.4_10.10.10.3]: MRTG_INT_IP="10.10.10.3"
MRTG_INT_DESCR="Vlan2"
# MaxBytes[10.254.9.4_10.10.10.3]: 12500000
# Title[10.254.9.4_10.10.10.3]: Vlan2 -- ODN-WCAT55-RSM
# PageTop[10.254.9.4_10.10.10.3]: <H1>Vlan2 -- ODN-WCAT55-RSM</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>ODN-WCAT55-RSM in </TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Vlan2 server Complex Ethernet </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Vl2</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
#    <TR><TD>Ip:</TD>         <TD>10.10.10.3 ()</TD></TR>
#  </TABLE>





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi