[mrtg] Re: How to configure MRTG through a firewall

[Sawyer, David]

UDP port 161, since this is UDP traffic and not TCP, you may have to have
the rule in twice, one inbound and one outbound.

What else should be considered?
Security, where possible limit the devices that can send SNMP traffic
through your F/W.

> -----Original Message-----
> From: shawn xu [mailto:shawnxu2000 at yahoo.com]
> Sent: 06 February 2002 15:02
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] How to configure MRTG through a firewall
> 
> 
> 
> I want to put a MRTG running machine behind a
> firewall, what ports should be opened on the firewall
> in order for MRTG to work? or what else should be
> considered?
> 
> Thanks
> 
> Shawn


----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi