[mrtg] Re: Still Blank graphs

[Bishop, Dean]

whoops, i misspoke.  what i meant was to use steve shipways routers.cgi.
This is what gives you the csv option.  configuration is pretty straight
forward just check his site.

www.cheshire.demon.co.uk/pub

regards,
dean

-----Original Message-----
From: Jason Lixfeld [mailto:jlixfeld at andromedas.com]
Sent: Thursday, July 18, 2002 9:21 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Still Blank graphs



I'm normally using mrtg-rrd, but I used 14all to see if it made a
difference.

I looked through the 14all docs and I couldn't find the option or cgi
you spoke of to dump to cvs -- where do I find info on this?  I did
however find the 14all*rrdtoollog option to specify a rrdtool call log
file.  I configured that, ran it and got this for one of my graphs..
Looks clean:

[root at blackbox bin]# more /tmp/log

# call to rrdtool:
rrdtool graph ARRAY(0x83f3554)
# completed without error

# call to rrdtool:
rrdtool graph ARRAY(0x83f3554)
# completed without error

# call to rrdtool:
rrdtool graph ARRAY(0x83f3554)
# completed without error

# call to rrdtool:
rrdtool graph ARRAY(0x83f3554)
# completed without error

# call to rrdtool:
rrdtool graph ARRAY(0x83f3554)
# completed without error
[root at blackbox bin]#

> -----Original Message-----
> From: Bishop, Dean [mailto:dean.bishop at tcdsb.org] 
> Sent: Thursday, July 18, 2002 7:44 AM
> To: 'Jason Lixfeld'; mrtg at list.ee.ethz.ch
> Subject: RE: [mrtg] Still Blank graphs
> 
> 
> Have you made any changes to your config?  It sounds like you 
> might have to
> diddle with scaling or something of that nature.  Are you 
> using 14all?  It
> has  a handy cgi to dump the info from rrd's to csv.  At 
> least then you
> could have a look at the data collected to see if it is off 
> the charts.
> 
> just thoughts,
> dean
> 
> -----Original Message-----
> From: Jason Lixfeld [mailto:jlixfeld at andromedas.com]
> Sent: Wednesday, July 17, 2002 11:24 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Still Blank graphs
> 
> 
> 
> I tried a couple things on a recommendation from someone that 
> it may be
> a kernel problem.  I've since recompiled the newest stable kernel but
> the problem is still there.  Wondering if anyone has any other
> suggestions?

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi