[mrtg] Re: LoadMIB:

[Sawyer, David]

If your using the OID you don't need to use the MIB name.

---
Here is the text from the reference.html file...

Load the MIB file(s) specified and make its OIDs available as symbolic
names. For better efficiency, a cache of MIBs is maintained in the WorkDir.
---

So ditch the 'LoadMib:' parameter or use the name associated with the OID in
the Target...

i.e.
Target[device]: MyMibName.instance&MyMibName.instance:CommunityString at device

Have you done an SNMP walk on the OID you gave below to see what it returns?
As this should be done before any config is made to make sure the device
understands the OID.

HTH
David Sawyer

Email: david.sawyer at mckesson.co.uk

 www.geocities.com/mrtg_daemon
   MRTG/RRDTool daemon for Windows9x/ME/2k
   MRTG GUI ConfigMaker for Windows9x/ME/2k
   TopTalker - See who the top talkers are on your network



-----Original Message-----
From: Matt Katona [mailto:mkatona at comwavz.com]
Sent: 24 July 2002 15:23
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] LoadMIB:



OK, 

So I am having trouble getting a Cisco MIB/OID to work. Tell me if I am
crazy:

Both ends of the IP Sec tunnel are Cisco routers
Ciscos website tells me they both support IPSec-Flow and IPEncrption MIBS
I complied both mibs
I add the following line into my config:
LOADMIB: pathtomib\CISCO-IPSEC-FLOW-MONITOR-MIB.smidb,
pathtomib\CISCO-IP-ENCRYPTION-MIB.smidb
then I add the OID to the targets where the last octect (.11) is the
interface of the tunnel on the router
1.3.6.1.4.1.9.9.52.1.3.2.1.5.11&1.3.6.1.4.1.9.9.52.1.3.2.1.6.11

Run the config, no problems.. But it tells me no traffic. I have MRTG
polling the tunnel interface and it records that it sees traffic going down
the tunnel.. Thoughts?




----------------------------------------------------------------------------
The information contained in this e-mail is confidential and is intended
only for the named recipient(s). If you are not the intended recipient you
must not copy, distribute, or take any action or reliance on it.
If you have received this e-mail in error, please notify the sender.
Any unauthorised disclosure of the information contained in this e-mail
is strictly prohibited.
----------------------------------------------------------------------------


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi