[mrtg] Re: Cisco 2600 & 2950 cpu usage

[Garry Cook]

Below is what I use to graph 1 minute and 5 minute CPU Utilization on Cisco 2500 and 2600 series routers.

# Cisco router CPU utilization (1 min & 5 min) report for 10.1.34.1
Target[10.1.34.1_cpu]: 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0:mAcTeCrEaD!@10.1.34.1
Options[10.1.34.1_cpu]: gauge,growright
WithPeak[10.1.34.1_cpu]: dwmy
YLegend[10.1.34.1_cpu]: Util(percent)
MaxBytes[10.1.34.1_cpu]: 100
LegendI[10.1.34.1_cpu]: CPU Usage (5 min)
LegendO[10.1.34.1_cpu]: CPU Usage (1 min)
Title[10.1.34.1_cpu]: CPU (1 & 5 min)
Unscaled[10.1.34.1_cpu]: dwmy
Legend1[10.1.34.1_cpu]: CPU utilization over 1 minute
Legend2[10.1.34.1_cpu]: CPU utilization over 5 minute
Legend3[10.1.34.1_cpu]: Max CPU - 1 min
Legend4[10.1.34.1_cpu]: Max CPU - 5 min
ShortLegend[10.1.34.1_cpu]: %
PageTop[10.1.34.1_cpu]: <H1>CPU Utilization - Dummy Entry</H1>

HTH

Garry W. Cook, CCNA
Network Infrastructure Manager
MACTEC, Inc. - http://www.mactec.com/
303.308.6228 (Office) - 303.881.5157 (Mobile)


> I'm trying to graph the cpu usage of cisco 2950 and cisco2600.
> 
> I'm using mrtg-2.9.18pre12 is the Multi Router Traffic Grapher.
> 
> If i try with snmpwalk snmpwalk Host PublicKey 1.3.6.1.4.1.9.2.1.58.0
> I got a null result
> 
> If i try with snmpwalk snmpwalk Host PublicKey 
> .1.3.6.1.4.1.9.2.1.58.0 ( notice the . at the begining )
> i got this : enterprises.9.2.1.58.0 = 22 ( the cpu usage )
> 
> In my mrtg config file i have tried with :
> 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:PublicKey at Host
> and
> .1.3.6.1.4.1.9.2.1.58.0&.1.3.6.1.4.1.9.2.1.58.0:PublicKey at Host
> 
> The two of them alway return 0 in the graph .... is this a 
> bug i something i don't do corectly ?

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi