[mrtg] Re: Cisco 2610 monitoring problems

[GundW at BELL.CO.ZA]

Try this.

set snmp community read-only      public
set snmp community read-write     private
set snmp community read-write-all secret

Rgds

Gund

+27 (0) 82 879 6606 cell

gundw at bell.co.za


                                                                                                                                                 
                      Matthew Halliday                                                                                                           
                      <matthew.halliday at johnstonp        To:       "'Mrtg (E-mail)" <mrtg at list.ee.ethz.ch>                                       
                      ress.co.uk>                        cc:                                                                                     
                      Sent by:                           Subject:  [mrtg] Cisco 2610 monitoring problems                                         
                      mrtg-bounce at list.ee.ethz.ch                                                                                                
                                                                                                                                                 
                                                                                                                                                 
                      2002/09/18 05:27 PM                                                                                                        
                                                                                                                                                 
                                                                                                                                                 





Hi again...

Still having problems.  I'm gettin gthe following readout:

SNMP Error:
receiving response PDU: Unknown error
SNMPv1_Session (remote host: "aaa.bbb.ccc.ddd" [aaa.bbb.ccc.ddd].161)
                  community: "public"
                 request ID: 192025681
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 2
                    backoff: 1)
SNMPGET Problem for ifInOctets.1 ifOutOctets.1 sysUptime sysName on
public at aaa.
bbb.ccc.ddd
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''

The router config looks like this... (sone parts have been changed to
protect the guilty)

!
service timestamps debug uptime
service timestamps log uptime
service password-encryption
no service tcp-small-servers
no service udp-small-servers
!
hostname Fred
!
enable password ..........
!
no ip name-server
!
ip subnet-zero
no ip domain-lookup
ip routing
!
interface Ethernet 0/0
 no shutdown
 description connected to EthernetLAN
 ip address xxx.yyy.zzz.aaa 255.255.255.0
 keepalive 10
!
interface Serial 0/0
 no description
 no ip address
 shutdown
!
interface Serial 0/1
 no description
 no ip address
 shutdown
!
router rip
 version 2
 network xxx.yyy.zzz.0
 no auto-summary
!
!
ip classless
no ip http server
snmp-server community public RO
no snmp-server location
no snmp-server contact
!
line console 0
 exec-timeout 0 0
 password c1sc0
 login
!
line vty 0 4
 password .........
 login
!
end

Sorry about this - I've not done much of this on routers.  Can anyone offer
any advice?

Matt

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi






--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi