[mrtg] Re: MRTG Newbie question...

[fluhmann at vvm.com]

By Default, MRTG reports in Bytes.  You want to change this to bits by
adding it into your config file (global parameters):
Options[_]: bits

This will show 544.1kB/s as 4352.8kb (or 4.352Mb).  The config file may
still show the MAX speed as being 12500000 (representing Bytes), but your
graphs should reflect 100Mb.

Jeremy

> The only problem that I have is that it appears to be a
> decimal place off in all the HTML.
>
> Example:
>
> HTML Report says:
> Max  In:	 544.1 kB/s (4.4%) 		Average  In:	 495.4 kB/s
> (4.0%) 		Current  In:	 544.1 kB/s (4.4%)
>
> The numbers should be 5.441 MB etc. The decimal place is off in this
> manner on all ports that are being reported on.
>
> Also The MAX speeds are all wrong.
>
> I have 3 active interfaces:
>
> FastEthernet0/0 - 12.5 MBytes/s (should be 100MB)
> Hssi2/0 - Max Speed: 1500.0 kBytes/s (should be 12 MB)
> Hssi3/0 - Max Speed: 1500.0 kBytes/s (should be 12 MB)
>
>     I have read though the online docs and not found any help, If I have
> missed docs that can help I would be happy if someone could point me in
> the right direction.
>
> Thanks!!!
> Phil Carroll


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi