[mrtg] Confused! 5509 Blues!

[Stephen Hughes]

Hello all. 

This is my second posting to the mailing list. Im afraid i will probably annoy most of you all but i have no where else to turn to:)

I have a Cisco 5509. I want to monitor ports on it. I have done an ifindex on the router and have the ifnumbers. I went to Somix, got the template they provide. It simply will not work (see below for error). I had no problem what so ever monitoring some Cisco 1924 switches with somix's templates. What is different about the 5509? 

I am quite new to SNMP i must admit and it is by far the complicated thing i have ever come across. (or maybe i am as stupid as i look ;) )

Also... I can do an snmpwalk fine.. i have absolutely no idea how to tell what info from a walk is usefull to me for to monitor ports....


Here is the error i am getting:

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.114)
SNMPv1_Session (remote host: "57.30.254.3" [57.30.254.3].161)
                  community: "bhdpub"
                 request ID: -897006547
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1) at D:/Mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 486
SNMPGET Problem for ifInOctets.114 ifOutOctets.114 sysUptime sysName on bhdpub at 57.30.254.3::::::v4only at mrtg line 1798
ERROR: Target[aaa][_IN_] ' $target->[0]{$mode} ' did not eval into defined data
ERROR: Target[aaa][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data

WARNING: Skipping Update of aaa, inlast is not defined
WARNING: Skipping Update of aaa, outlast is not defined


Here is the script i am running. (i have shortened it until i get it working)

WorkDir: d:\output
Refresh: 300
RunAsDaemon: Yes
EnableIPv6: no
Interval: 5

Target[aaa]: 114:bhdpub at 57.30.254.3
MaxBytes[aaa]:  12500000
Options[aaa]:  bits, unknaszero
Title[aaa]:  Fiber Port 1 (Module 3)
PageTop[aaa]:  <H1>Fiber Port 1 (Module 3)</H1>
YLegend[aaa]:  Port Utilization
LegendI[aaa]:  In
LegendO[aaa]:  Out
Legend1[aaa]:  Inbound Bits
Legend2[aaa]:  Outbound Bits
Legend3[aaa]:  INBOUND Max value per interval on graph
Legend4[aaa]:  OUTBOUND Max value per interval on graph
Colours[aaa]:  GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[aaa]:  ymw


If anyone could assist me i would be most grateful. I apologise to those who have read this far and are pissed off:) 

Thankyou


Stephen Hughes
Systems Engineer

Belfast City Airport

-------------------------------------------------------------
This email and any files transmitted with it are confidential
and intended solely for the use of the individual(s) to whom 
it is addressed. Any views or opinions presented are solely 
those of the author and do not necessarily represent those of
Belfast City Airport Limited unless otherwise stated.

If you are not the intended recipient, be advised that you 
have received this email in error and that any use, 
dissemination, forwarding, printing or copying of this email 
is strictly prohibited, and that the email should be returned 
to the sender.  If you are not the intended recipient please 
contact postmaster at belfastcityairport.com.
--------------------------------------------------------------

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi