[mrtg] Re: Fw: Getting info per host on PIX

[Ilker YILMAZ]

The link is very useful if you want to monitor the devices *through* the
pix:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note
09186a0080094a13.shtml
 
 

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]
On Behalf Of Leen Smit
Sent: Thursday, February 06, 2003 11:06 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Fw: Getting info per host on PIX


Hi There!

I''ve been playing around with mrtg to get the bandwidth usage of our
Cisco PIX. After several tries i managed to produce the total usage on
the PIX for daily, weekly, yearly. However, i would like to have reports
for several different hosts on the DMZ.. Is it possible to do this?
If so, can some one give me some hints on how to do this? Ive been
reading a lot of RTFM's, FAQ's and examples, but the truth is, that im a
bit lost at this stage...

Any help would be greatly appreciated!

      Leen Smit
     

running mrtg 2.9.17-8 on RH8.0 - PII at 266/256mb 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi