[mrtg] Re: 14 hours

José A. Calderón C. jcalderon at bankguay.com
Sun Jul 13 20:51:16 MEST 2003


Thanks a lot,  I will try it....


-----Mensaje original-----
De: Burke, John R. [mailto:John.Burke2 at BHSALA.com]
Enviado el: Viernes, 11 de Julio de 2003 15:35
Para: José A. Calderón C.; mrtg list
Asunto: RE: [mrtg] Re: 14 hours

There is a setting in the routers2.conf file that will let you define
"working hours". Once you set this, it will give a working day average at
the bottom of the graph. It will also hightlight these hours in yellow.

john


-----Original Message-----
From: José A. Calderón C. [mailto:jcalderon at bankguay.com]
Sent: Friday, July 11, 2003 1:41 PM
To: Koelstra, J. (Jan); Zuber, Manfred; mrtg list
Subject: [mrtg] Re: 14 hours



Hi again friends
I switched successfully to rrd-tool. I am using routers2.cgi to visualize
the pages, and want the average of bandwidth only for 14 hours a day, it
mean from 06h00 to 20h00. Anyone can help me ??? How can I do that??? I want
to do this because the traffic in the night is 0 and this affect the total
average of the bandwidth used.

Thanks a lot.


jacc


-----Mensaje original-----
De: Koelstra, J. (Jan) [mailto:JKoelstra at minszw.nl]
Enviado el: Jueves, 13 de Marzo de 2003 9:50
Para: Zuber, Manfred; José Antonio Calderón C.; mrtg list
Asunto: RE: [mrtg] Re: 14 hours

Manfred,

I Am afraid this will not work: Even when MRTG doesn't poll every 5 minutes
the averages you get are stil computed over the full 24 hours. IMO the only
way to achieve the monitoring of a specific timeslot is by switching to
rrd-tool.

Jan.

-----Original Message-----
From: Zuber, Manfred [mailto:Manfred.Zuber at sisclear.com]
Sent: Thursday, March 13, 2003 3:39 PM
To: José Antonio Calderón C.; mrtg list
Subject: [mrtg] Re: 14 hours


Dear José

Just use the scheduler of W2k.

- Start Time = 06:00
- Interval = 5 Minutes
- Duration = 14 hours

Hth, kind regards and good luck

Manfred

-----Original Message-----
From: José Antonio Calderón C. [mailto:jcalderon at bankguay.com]
Sent: Donnerstag, 13. März 2003 15:35
To: mrtg list
Subject: [mrtg] 14 hours

Hi, I have installed mrtg-2.9.25 on widows 2000 server monitoring more than
50 routers IBM-2210. All is fine, but I want to run mrtg only by 14 hours
for day, or make the average only for this period, because between 20h00 and
06h00 the traffic is 0 and I dont want a average for this hours, I want the
average only from 6h00 to 20h00. Can I do that??? Best regards jacc

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


****************************************************************************
The content of this e-mail is intended only for the confidential use of the
person addressed. If you have received this message in error, please notify
us immediately by electronic mail, by telephone or by fax at the above num-
bers.

E-mail communications are not secure and therefore we do not accept any res-
ponsibility for the confidentiality or altered contents of this message.

Please be aware that SIS Group and its subsidiary companies cannot accept
any orders or other legally binding correspondence with a participant as
part of an E-mail. The views expressed above are not necessarily those held
by SIS Group and its subsidiary companies and not binding for them.
************************************************************************exfe

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke
aansprakelijkheid uit in verband met het niet juist, onvolledig of niet
tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen
geen rechten worden ontleend.

Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet
voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de
inhoud van het bericht te vernietigen.
----------------------------------------------------------------------------
----------------------------------------------------------------------------
------------------------------------------------------------------
The ministry of Social Affairs and Employment is not liable for any
incorrect or incomplete transmission of the information in this e-mail or
for any delay in its receipt. This message shall not constitute any
obligations.

This message is intended solely for the addressee.
If you have received this message in error, please inform us immediately and
delete its content.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list