[mrtg] Re: question about MIB/tempTrax

Fauteux, Joe Joe.Fauteux at paymentech.com
Mon Nov 3 20:34:17 MET 2003


that error is just what i mentioned - the TempTrax does not support MIBII sysatem MIB - provided you have a recnt version of MRTG  you should be able to put the noMib2 option at the beggining of your config file - just under the WorkDir line

-----Original Message-----
From: Alex Zheng [mailto:azheng at monterey.k12.ca.us]
Sent: Monday, November 03, 2003 1:40 PM
To: Fauteux, Joe
Cc: mrtg at list.ee.ethz.ch
Subject: Re: [mrtg] Re: question about MIB/tempTrax



where do you specify noMib2 option?

when I do:

cfgmaker green at 10.10.1.6                 (10.10.1.6 is tempTrax sensor' ip 
address)


I got following error:

# ./cfgmaker green at 10.10.1.6
--base: Get Device Info on green at 10.10.1.6:
SNMP Error:
Received SNMP response with error code
   error status: noSuchName
   index 1 (OID: 1.3.6.1.2.1.1.1.0)
SNMPv1_Session (remote host: "10.10.1.6" [10.10.1.6].161)
                   community: "green"
                  request ID: 1809657765
                 PDU bufsize: 8000 bytes
                     timeout: 2s
                     retries: 5
                     backoff: 1)
  at /export/home/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 458
SNMPGET Problem for sysDescr sysContact sysName sysLocation sysObjectID on 
green at 10.10.1.6:
  at ./cfgmaker line 673
--base: Vendor Id:
--base: Populating confcache
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifSpeed
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
# Created by
# ./cfgmaker green at 10.10.1.6


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System:
# Description:
# Contact:
# Location:
######################################################################


At 04:49 AM 11/3/2003, you wrote:
>mrtg does not need to see the MIB file - you will have problems monitoring 
>the temperature with the TempTrax using MRTG unless you specify the NoMib2 
>option in your config - the TempTrax does not support the MIBII system MIB
>
>-----Original Message-----
>From: Alex Zheng [mailto:azheng at monterey.k12.ca.us]
>Sent: Friday, October 31, 2003 3:36 PM
>To: mrtg at list.ee.ethz.ch
>Subject: [mrtg] question about MIB/tempTrax
>
>
>
> >
> >
> >
> >
> >
> >We had purchased a temperature monitor - TempTrax Model E. The vendor has
> >a MIB file, but for MRTG to monitor the output of device(i.e., temperature
> >output) , where should I place the mib file so that mrtg will see? and how
> >should I generate the cfg file using cfgmaker?
> >
> >
> >
> >
> >thanks.
> >
> >alex
>
>--
>Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>Archive     http://www.ee.ethz.ch/~slist/mrtg
>FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
>WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
>
>Learn more about Paymentech's payment processing services at 
>www.paymentech.com
>THIS MESSAGE IS CONFIDENTIAL.  This e-mail message and any attachments are 
>proprietary and confidential information intended only for the use of the 
>recipient(s) named above.  If you are not the intended recipient, you may 
>not print, distribute, or copy this message or any attachments.  If you 
>have received this communication in error, please notify the sender by 
>return e-mail and delete this message and any attachments from your computer.
>
>--
>Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
>Archive     http://www.ee.ethz.ch/~slist/mrtg
>FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
>WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


  
Learn more about Paymentech's payment processing services at www.paymentech.com
THIS MESSAGE IS CONFIDENTIAL.  This e-mail message and any attachments are proprietary and confidential information intended only for the use of the recipient(s) named above.  If you are not the intended recipient, you may not print, distribute, or copy this message or any attachments.  If you have received this communication in error, please notify the sender by return e-mail and delete this message and any attachments from your computer.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list