[mrtg] Re: Threshold monitoring

[Keith McCallion]

On Thu, 12 Feb 2004, Kerry Werry wrote:

> This should be possible with the basic threshold options. You have min
> and max threshold options, so set both for one interface say a max of
> 70% and a min of 10% and you will bet alarms when you go above the max
> 9and back below it) and below the min (and back above it)... I think
> that does what you want???

Not quite.

What I want to catch is variance. So if the utilization has dropped 10%
since the last time MRTG ran, it would run a program like Threshold
monitoring does. Ideally, I'd set this to something like 5%,10%,15% for a
5% drop/spike in one period, 10% drop/spike in 3 periods, 15% drop/spike
in 6 periods.

If I monitor for 10%, I may get alerts in the middle of the night when I'm
ok with traffic being low, but not catch large drops in traffic (75% ->
40%) during peak.

My traffic flow is pretty predictable and slowly ramps up and down, so we
can do this visually, but I'd really like to automate this. We cannot
visually monitor 10,000 different graphs.


Keith

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi