[mrtg] Re: BGP-IP address

[Jon Nistor]

||Dear Mr. Jon,
||This will only graph the number of advertised prefixes,, am I right ?..
Correct.  As a side note, if you own a juniper, you can graph prefixes vs 
used prefixes.

||Infact I need to graph the traffic going through each(or particular)
||prefixes advertised though us. 

Your alternative would be netflow, maybe using like pmacct or someting 
from caida or flow-tools.


Hope this helps,


||From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
||Behalf Of Jon Nistor
||Sent: Monday, January 24, 2005 8:37 PM
||To: Bill Wichers
||Cc: Muhammed Ali; mrtg at list.ee.ethz.ch
||Subject: [mrtg] Re: BGP-IP address
||
||||Yes, you can graph BGP route prefixes, but that info is not directly
||||accessible via SNMP. If you dig around through the archives there's a perl
||||script in there that I wrote some years back that will telnet to the
||||router, run 'show ip bgp sum', and parse the results for use by MRTG.
||
||You can graph BGP prefixes in 12.0(26)S+ (I believe)
||
||snmpwalk -m ALL -v 2c -c public core1
||1.3.6.1.4.1.9.9.187.1.2.4.1.1.192.168.1.35
||CISCO-BGP4-MIB::ciscoBgp4MIBObjects.2.4.1.1.192.168.1.35.1.1 = Counter32:
||150973
||
||I'm runinng 12.0(28)S and it shows up.
||
||
|| ________
||  Jon (nistor at snickers.org) - iooooio.iioooiii.ioiioioo.iiiiioio
||
||: EOF
||:
||
||--
||Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
||Archive     http://www.ee.ethz.ch/~slist/mrtg
||FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
||WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
||
||

 ________
  Jon (nistor at snickers.org) - iooooio.iioooiii.ioiioioo.iiiiioio

: EOF
:

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi