[mrtg] Re: Increasing interval problem

[Jon]

I have the Interval: option set at 60 when I first create the rrd files.

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch] On
Behalf Of PAUL WILLIAMSON
Sent: Friday, June 24, 2005 2:49 PM
To: MRTG at list.ee.ethz.ch
Subject: [mrtg] Re: Increasing interval problem

What is your Interval setting set to?

That should be set in your config files.  I think you 
also need that to be set during the creation of 
your log files (if on old .log files) to be set properly.
Although I may be wrong on that one.

Simply adjusting the polling without setting the 
Interval: option doesn't do much, other than lower the 
utlization statistics.

Paul

>>> Jon <jonsml at gmail.com> 06/24/05 2:40 PM >>>
Hi all,
I'm currently having problems setting the interval value beyond 10
minutes.

My system is:
Windows 2003
Mrtg 2.11.1
Rrdtool 1.0.49
Routers2 2.14

While everything else works great except when I want to increase the
interval to 30 minutes.  First I use a schedule task to call mrtg every
30
minutes but that didn't work.  Then I use wperl and 'RunAsDaemon' mode
to
run it as a background service and it still didn't work.  So I kept
lowering
the interval and it worked with 10 minutes interval.

Thanks,

Jon


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://lists.ee.ethz.ch/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz.ch/lsg2.cgi