[mrtg] Discouraged with CPU counter

[Joel A Savage]

Well I can pull information via snmp for example this works fine 
Target[honor.fpc.edu_65539]: 65539:fpcim at honor.fpc.edu:
SetEnv[honor.fpc.edu_65539]: MRTG_INT_IP="172.18.0.15"
MRTG_INT_DESCR="Broadcom-NetXtreme-Gigabit-Ethernet"
MaxBytes[honor.fpc.edu_65539]: 12500000
Title[honor.fpc.edu_65539]: Traffic Analysis for 65539 -- HONOR
PageTop[honor.fpc.edu_65539]: <h1>Traffic Analysis for 65539 --
HONOR</h1>
                <div id="sysdetails">
                        <table>
                                <tr>
                                        <td>System:</td>
                                        <td>HONOR in FPC</td>
                                </tr>
                                <tr>
                                        <td>Maintainer:</td>
                                        <td>IT</td>
                                </tr>
                                <tr>
                                        <td>Description:</td>
 
<td>Broadcom-NetXtreme-Gigabit-Ethernet  </td>
                                </tr>
                                <tr>
                                        <td>ifType:</td>
                                        <td>ethernetCsmacd (6)</td>
                                </tr>
                                <tr>
                                        <td>ifName:</td>
                                        <td></td>
                                </tr>
                                <tr>
                                        <td>Max Speed:</td>
                                        <td>100.0 Mbits/s</td>
                                </tr>
                                <tr>
                                        <td>Ip:</td>
                                        <td>172.18.0.15
(honor.fpc.edu)</td>
                                </tr>
                        </table>
                </div>


 
 

-----Original Message-----
From: david brett [mailto:dbrett at tcn.net] 
Sent: Friday, May 23, 2008 3:25 PM
To: Joel A Savage
Cc: mrtg at lists.oetiker.ch
Subject: Re: [mrtg] Discouraged with CPU counter

Sounds like a mismatch in the community strings, check to make sure they

match (including case).  If they do check firewall rules and who is 
allowed to read the snmp information

Joel A Savage wrote:
> Well when I do the snmpwalk I get 
> snmpwalk: Timeout
> 
> I know snmp service is installed and running on the target machine. 
> 
> Does this mean I don't have the mibs loaded on to the target machine
or
> something? 
> 
>  
>  
>  
> 
> -----Original Message-----
> From: Chris Cariffe [mailto:ccariffe at gmail.com] 
> Sent: Friday, May 23, 2008 3:04 PM
> To: Joel A Savage
> Subject: Re: [mrtg] Discouraged with CPU counter
> 
> snmpwalk -c your_community_string your_dell_server
> .1.3.6.1.2.1.25.3.3.1.2
> 
> this oid should return the cpu's from a dell box
> 
> On Fri, May 23, 2008 at 11:12 AM, Joel A Savage
> <savagej at franklinpierce.edu> wrote:
>> For the last 3 days I have been trying to get my MRTG instance to
read
>> the cpu of a windows 2003 server
>>
>> So far I have had no luck, tried a multitutde of cfg's oid's etc no
>> luck.
>>
>> I am going to start from ground zero here
>>
>> The mrtg machine is a vm of slackware 12
>>
>> The windows machine is a dell PE 1650
>> Is there anything other than the snmp service that needs to be setup
> on
>> the windows machine?
>>
>> Any advice is greatly appreciated
>>
>> I am about ready to shove a 1/4 stick into the server.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> mrtg mailing list
>> mrtg at lists.oetiker.ch
>> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>>
> 
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
> 
>