[mrtg] Discouraged with CPU counter

[david brett]

Sounds like a mismatch in the community strings, check to make sure they 
match (including case).  If they do check firewall rules and who is 
allowed to read the snmp information

Joel A Savage wrote:
> Well when I do the snmpwalk I get 
> snmpwalk: Timeout
> 
> I know snmp service is installed and running on the target machine. 
> 
> Does this mean I don't have the mibs loaded on to the target machine or
> something? 
> 
> Joel A. Savage
> Systems Administrator (IT)
> Franklin Pierce University
> 40 University Drive
> Rindge, NH 03461
> (603) 899-4335
>  
>  
> http://www.franklinpierce.edu
> savagej at franklinpierce.edu
>  
>  
>  
>  
> 
> -----Original Message-----
> From: Chris Cariffe [mailto:ccariffe at gmail.com] 
> Sent: Friday, May 23, 2008 3:04 PM
> To: Joel A Savage
> Subject: Re: [mrtg] Discouraged with CPU counter
> 
> snmpwalk -c your_community_string your_dell_server
> .1.3.6.1.2.1.25.3.3.1.2
> 
> this oid should return the cpu's from a dell box
> 
> On Fri, May 23, 2008 at 11:12 AM, Joel A Savage
> <savagej at franklinpierce.edu> wrote:
>> For the last 3 days I have been trying to get my MRTG instance to read
>> the cpu of a windows 2003 server
>>
>> So far I have had no luck, tried a multitutde of cfg's oid's etc no
>> luck.
>>
>> I am going to start from ground zero here
>>
>> The mrtg machine is a vm of slackware 12
>>
>> The windows machine is a dell PE 1650
>> Is there anything other than the snmp service that needs to be setup
> on
>> the windows machine?
>>
>> Any advice is greatly appreciated
>>
>> I am about ready to shove a 1/4 stick into the server.
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> mrtg mailing list
>> mrtg at lists.oetiker.ch
>> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>>
> 
> _______________________________________________
> mrtg mailing list
> mrtg at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
> 
>