[mrtg] Discouraged with CPU counter

[david brett]

Try doing snmpwalk without specifying the mib, if this fails then 
specify the version.  Once this works then go back and try specifying 
the mib

Joel A Savage wrote:
> Well I can pull information via snmp for example this works fine 
> Target[honor.fpc.edu_65539]: 65539:fpcim at honor.fpc.edu:
> SetEnv[honor.fpc.edu_65539]: MRTG_INT_IP="172.18.0.15"
> MRTG_INT_DESCR="Broadcom-NetXtreme-Gigabit-Ethernet"
> MaxBytes[honor.fpc.edu_65539]: 12500000
> Title[honor.fpc.edu_65539]: Traffic Analysis for 65539 -- HONOR
> PageTop[honor.fpc.edu_65539]: <h1>Traffic Analysis for 65539 --
> HONOR</h1>
>                 <div id="sysdetails">
>                         <table>
>                                 <tr>
>                                         <td>System:</td>
>                                         <td>HONOR in FPC</td>
>                                 </tr>
>                                 <tr>
>                                         <td>Maintainer:</td>
>                                         <td>IT</td>
>                                 </tr>
>                                 <tr>
>                                         <td>Description:</td>
>  
> <td>Broadcom-NetXtreme-Gigabit-Ethernet  </td>
>                                 </tr>
>                                 <tr>
>                                         <td>ifType:</td>
>                                         <td>ethernetCsmacd (6)</td>
>                                 </tr>
>                                 <tr>
>                                         <td>ifName:</td>
>                                         <td></td>
>                                 </tr>
>                                 <tr>
>                                         <td>Max Speed:</td>
>                                         <td>100.0 Mbits/s</td>
>                                 </tr>
>                                 <tr>
>                                         <td>Ip:</td>
>                                         <td>172.18.0.15
> (honor.fpc.edu)</td>
>                                 </tr>
>                         </table>
>                 </div>
> 
> 
>  
>  
> 
> -----Original Message-----
> From: david brett [mailto:dbrett at tcn.net] 
> Sent: Friday, May 23, 2008 3:25 PM
> To: Joel A Savage
> Cc: mrtg at lists.oetiker.ch
> Subject: Re: [mrtg] Discouraged with CPU counter
> 
> Sounds like a mismatch in the community strings, check to make sure they
> 
> match (including case).  If they do check firewall rules and who is 
> allowed to read the snmp information
> 
> Joel A Savage wrote:
>> Well when I do the snmpwalk I get 
>> snmpwalk: Timeout
>>
>> I know snmp service is installed and running on the target machine. 
>>
>> Does this mean I don't have the mibs loaded on to the target machine
> or
>> something? 
>>
>>  
>>  
>>  
>>
>> -----Original Message-----
>> From: Chris Cariffe [mailto:ccariffe at gmail.com] 
>> Sent: Friday, May 23, 2008 3:04 PM
>> To: Joel A Savage
>> Subject: Re: [mrtg] Discouraged with CPU counter
>>
>> snmpwalk -c your_community_string your_dell_server
>> .1.3.6.1.2.1.25.3.3.1.2
>>
>> this oid should return the cpu's from a dell box
>>
>> On Fri, May 23, 2008 at 11:12 AM, Joel A Savage
>> <savagej at franklinpierce.edu> wrote:
>>> For the last 3 days I have been trying to get my MRTG instance to
> read
>>> the cpu of a windows 2003 server
>>>
>>> So far I have had no luck, tried a multitutde of cfg's oid's etc no
>>> luck.
>>>
>>> I am going to start from ground zero here
>>>
>>> The mrtg machine is a vm of slackware 12
>>>
>>> The windows machine is a dell PE 1650
>>> Is there anything other than the snmp service that needs to be setup
>> on
>>> the windows machine?
>>>
>>> Any advice is greatly appreciated
>>>
>>> I am about ready to shove a 1/4 stick into the server.
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> mrtg mailing list
>>> mrtg at lists.oetiker.ch
>>> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>>>
>> _______________________________________________
>> mrtg mailing list
>> mrtg at lists.oetiker.ch
>> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>>
>>
> 
>