[rrd-users] Re: rrdtool - RRDtool shows some *millions* - followup?

[Serge Maandag]

Please note:

m = milli
M = mega

2.2000000000e-002 = 0.02200 = 22 m

Serge.

-----Original Message-----
From: dmahler at telcordia.com [mailto:dmahler at telcordia.com] 
Sent: Thursday, May 22, 2003 4:48 PM
To: rrd-users at list.ee.ethz.ch
Subject: [rrd-users] rrdtool - RRDtool shows some *millions* - followup?



>> But the graph generated by RRDtool shows some *millions* logined.
 
Was there ever a solution to this?   I seem to have the same problem. 
how exactly does rrd decide that its need to put "m" in the left hand 
vertical scale? is it simply if the rate is > 1M? 

I have created the rrd in question and dumped out its samples.  they
look 
ok.   the samples please are all under 1.     is that a clue?   just too

weird

I am collecting the data via mrtg
Target[xxxx_2_traffic]: 2:pppp at aaa.bbb.ccc.ddd
MaxBytes[xxxx_2_traffic]: 10000000

I have done eyeball checks on the "problem" rrd, and another rrd from
the 
same system that does not have the problem.  I cannot see a difference.

I have perhaps 1000 or so RRD's.  have this issue (left hand graph in
the 
milllions when it should not be) on perhaps 20.   very odd.
 

thanks


 
Don M 
 

 2003-05-22 10:10:00 2.2000000000e-002                   0.02200
 2003-05-22 10:15:00 2.2000000000e-002                   0.02200
 2003-05-22 10:20:00 2.1095709343e-002                   0.02110
 2003-05-22 10:25:00 2.1095709343e-002                   0.02110
 2003-05-22 10:30:00 2.0761245675e-002                   0.02076
 2003-05-22 10:35:00 2.0761245675e-002                   0.02076
 2003-05-22 09:00:00 2.1164021164e-002                   0.02116
 2003-05-22 09:30:00 2.0942408377e-002                   0.02094
 2003-05-22 10:00:00 2.1699819168e-002                   0.02170
 2003-05-22 10:30:00 2.2000000000e-002                   0.02200
 2003-05-22 10:00:00 2.1699819168e-002                   0.02170
 
 
 
 
 
 
========================================================================
=====


-snip -

 
This system is working correctly when I use snmpwalk and snmpget on
an interactive shell. But RRDtool interpret oddly.

For example, the number of logins is usually less than 10 or so. But the

graph generated by RRDtool shows some *millions* logined.

Note that the strange value is probably some millons times as much as 
``real'' value, i think.

Thanks,
 
M.R.Nakamura
roto at vuni.ne.jp
 



-snip -

  
From: Tobias Oetiker <oetiker at ee.ethz.ch>
Subject: [rrd-users] Re: Problem about RRA updating
Date: Tue, 27 Mar 2001 10:33:03 +0200 (MET DST)
 
> try modifying your script so that it writes an audit log of all 
information it sends to rrdtool ... and look at the log
 
 
 

--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:rrd-users-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:rrd-users-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/rrd-users
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi