[smokeping-users] CiscoRTTMonTcpConnect difficulties with Cisco7200 VXR series

[Rune Thorsplass]

Hi
What is your snmp (rw) community for IP SLA MIB on RouterA? Is it 
"community" ?

Here is what I'm using.

++++ Office1
menu = Office1
title = City 1
probe = CiscoRTTMonTcpConnect # if the default probe is something else
host=10.174.200.4    # DB server at Office1
ioshost= private at 10.174.0.124   # private is my snmp write community
iosint = 10.174.200.161    # Using ip address from Lan-interface of the 
router
port = 2025
pings = 3
tos = 160


RuneT
----- Original Message ----- 
From: "Stokkenes Vidar" <Vidar.Stokkenes at hn-ikt.no>
To: <smokeping-users at lists.oetiker.ch>
Sent: Monday, February 01, 2010 3:00 PM
Subject: [smokeping-users] CiscoRTTMonTcpConnect difficulties with Cisco7200 
VXR series


> Hello folks,
>
> I seem to be having problems with doing RTT checks via SNMP using a Cisco 
> 7204 VXR router as the probe device. We are currently running Smokeping 
> v2.004002 on the server.
>
> Here is a sample of my config:
>
> Global probe config:
>
> + CiscoRTTMonTcpConnect
>
> forks = 5
> offset = 50%
> step = 300
> timeout = 60
>
> Host config:
>
> ++++++ LocationAtoB
> menu = LocationAtoB
> title = Roundtrip from Location A to Location B
> probe = CiscoRTTMonTcpConnect
> host = routerB.domain.com
> port = 22
> ioshost = community at routerA.domain.com
>
> But my logfile says the following:
>
> Feb  1 14:28:16 server smokeping[9574]: SNMP Error: Received SNMP response 
> with error code   error status: commitFailed   index 1 (OID: 
> 1.3.6.1.4.1.9.9.42.1.2.1.1.9.9574) SNMPv2c_Session (remote host: 
> "routerB.domain.com" [192.168.10.1].161)                    community: 
> "community"                   request ID: 1390275956                  PDU 
> bufsize: 8000 bytes                      timeout: 2s 
> retries: 5                      backoff: 1)  at 
> /usr/lib/smokeping/SNMP_util.pm line 786
>
> According to the Cisco 7200 documentation it should support the 
> CISCO-RTTMON-MIB, but maybe the answer smokeping gets from the router is 
> considered as "rubbish" (as the logfile implies) Also, when I ssh from the 
> CLI from routerA to routerB it works without a problem. All the graphs 
> with this probe is empty. I am doing the same against a Cisco Catalyst 
> 6500 with no problems at all.
>
> Can someone please tell me why this won't work?
>
>
> Best regards,
>
> Vidar S
>
>
>
> _______________________________________________
> smokeping-users mailing list
> smokeping-users at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>