[mrtg] Re: OIDS/cisco frame subinterface multipoint

[Stieers, Ken]

I pulled what I sent you from the MIBHELP.TXT file that comes with MRTG.
The FrameRelay MIB is RFC1315.  I don't have a copy handy, but I'm sure you
can find it on the net. 

Ken

> -----Original Message-----
> From: CHARL VORSTER [mailto:charl_vorster at goodyear.com]
> Sent: Friday, October 22, 1999 5:07 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: OIDS/cisco frame subinterface multipoint
> 
> 
> Hi Ken,
> 
> Where did you get these F/R OID from, it's not listed in
> CISCO-FRAME-RELAY-MIB.oid? I'm lookin for others.
> 
> Thanks
> 
> Charl
> 
> 
> 
> 
> 
> 
> mrtg-bounce at list.ee.ethz.ch on 10/20/99 09:37:33 PM
> To: mrtg at list.ee.ethz.ch @ INTERNET, rockie at apk.net @ INTERNET
> cc:
> Subject: [mrtg] Re: OIDS/cisco frame subinterface multipoint
> 
> Have you tried:
> 
>     'frInOctets' => '1.3.6.1.2.1.10.32.2.1.9'
>     'frOutOctets' => '1.3.6.1.2.1.10.32.2.1.7'
> 
> which when used in the form:
> 
> frInOctets.pp.dd&frOutOctets.pp.dd:community at cisco.router
> 
> where pp is the physical port that the frame relay pvc is
> defined on and dd is the DLCI of the pvc gets you the in
> and out octets for just that pvc.
> 
> Ken
> 
> > -----Original Message-----
> > From: R. Brockway [mailto:rockie at apk.net]
> > Sent: Wednesday, October 20, 1999 2:20 PM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] OIDS/cisco frame subinterface multipoint
> >
> >
> > Does anyone know of any OIDS that have the ability to gather
> > in/out stats
> > on each dlci entry in a frame-relay serial multipoint subinterface?
> >
> > in example below (SDSL distribution over T3) each PVC is routed over
> > multipoint subinterface with static IP/DLCI map. i looked in the
> > CISCO-FRAME-RELAY-MIB.oid list and couldn't find anything
> > that would give
> > me stats on individual pvcs set up like this.
> >
> >
> > interface Hssi2/1
> >  no ip address
> >  no ip redirects
> >  no ip directed-broadcast
> >  no ip proxy-arp
> >  encapsulation frame-relay IETF
> >  bandwidth 9474
> >  keepalive 5
> >  frame-relay lmi-type ansi
> > !
> > interface Hssi2/1.7 multipoint
> >  ip address 192.168.1.1 255.255.255.0
> >  frame-relay map ip 192.168.1.2 32 IETF
> >  frame-relay interface-dlci 32
> >  frame-relay map ip 192.168.1.3 34 IETF
> >  frame-relay interface-dlci 34
> >  frame-relay map ip 192.168.1.4 36 IETF
> >  frame-relay interface-dlci 36
> >
> > thanks.
> >
> > -rockie
> > --
> > R. Brockway   APK Net Systems Administrator
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 
> 
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg