[mrtg] Re: Info on FR graphs...

Oyler, Michael moyler at harris.com
Tue Oct 26 14:37:33 MEST 1999


I see no data in the graphs and no data in the max, average, current  fields.
When I "monkey" around with the maxbytes sometime I get data but it is not
right. I tried using "gauge" hoping this would give back an absolute value and
keep tracking but no luck. There is something wrong with how the data is being
processed and recorded... This is the same with FECNs and BECNs and IN-OUT
Octets. All my other graphs with Ethernet look fine... Thanks for the
comeback...

	-----Original Message-----
	From:	David C Prall [SMTP:dcp at dcptech.com]
	Sent:	Tuesday, October 26, 1999 8:01 AM
	To:	mrtg at list.ee.ethz.ch
	Subject:	[mrtg] Re: Info on FR graphs...

	> Here is the config file I use for getting SentFrames and
	ReceivedFrames (FECNs
	> and BECNs does the same thing) information on our fame relay router
	interface. I
	> am getting the information back properly because I can see the data
	coming back
	> good by using a protocol analyzer, and verifying data value by using a
	SNMP
	> manager. I think the problem is in the formatting of the graphs. Any
	help would
	> be greatly appreciated...
	>
	> WorkDir: c:\InetPub\wwwroot\MRTG\mrtg_srframes
	> #
	> # This picks up SentFrames and ReceivedFrames DCLI 110
	> #
	> #Directory[_]:
	> #Unscaled[_]: dwyn
	> Options[_]: growright,nopercent,integer
	> #Background[_]: #a0a0a0a
	> MaxBytes1[_]: 1000000000
	> MaxBytes2[_]: 1000000000
	> AbsMax[_]: 10000000000
	> YLegend[_]: Frames
	> XSize[_]: 500
	> YSize[_]: 100
	> ShortLegend[_]: &nbsp
	> Legend1[_]: SentFrames
	> Legend2[_]: ReceivedFrames
	> Legend3[_]: Max SentFrames
	> Legend4[_]: Max ReceivedFrames
	> LegendI[_]: &nbsp SentFrames &nbsp
	> LegendO[_]: &nbsp ReceivedFrames &nbsp
	>
	> #---------------------------------------------------------------
	>
	Target[xx.xx.xx.xx.4]:1.3.6.1.2.1.10.32.2.1.6.4.110&1.3.6.1.2.1.10.32.2.
	1.8.4.11
	> 0:public at xxx.xxx.xxx.xxx.
	> Title[xx.xx.xx.xx.4]: rtr-chq-nxt1: Hssi0 SentFrames and
	ReceivedFrames for FR
	> router.4 </H1>
	> PageTop[xx.xx.xx.xx.xx.4]:<H1> Cisco 4700 SentFrames and
	ReceivedFrames FR
	> router.4</H1>
	>  </H1>
	>  <TABLE>
	>    <TR><TD>System:</TD><TD>(Cisco 4700)</TD></TR>
	>    <TR><TD>Maintainer:</TD><TD>Harris</TD></TR>
	>    <TR><TD>Interface:</TD><TD>Hssi0 (Port 4)</TD></TR>
	>    <TR><TD>IP:</TD><TD> xxx.xxx.xxx.xxx.x</TD></TR>
	>    <TR><TD>Max Speed:</TD>
	>        <TD> 4.608 Mbits/s (frame-relay)</TD></TR>
	>   </TABLE>

	Michael,
	What exactly is wrong with the graph.

	I think you need to add the option gauge:
	Options[_]: growright,nopercent,integer, gauge

	David C Prall, MCNE MCSE          DCP Technologies
	dcp at dcptech.com                       Alexandria, VA
	dcppage at dcptech.com               http://www.dcptech.com


	--
	* To unsubscribe from the mrtg mailing list, send a message with the
	  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
	* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg


More information about the mrtg mailing list