March 2000 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Mar 1 00:10:18 MET 2000
Ending: Fri Mar 31 23:10:06 MEST 2000
Messages: 606

• [mrtg] Fwd: Re: Newbie question again   Rann Sanders
• [mrtg] users connected on a cisco AS5300...   Angel Behar Rodriguez
• [mrtg] Y minimum ?   Fabio Cesar Gozzo
• [mrtg] Monitoring Mysql   Nicholas Ascione
  • [mrtg] Re: Monitoring Mysql   Ronnie Garcia
• [mrtg] Xsize 1-2 Hours ?   Marek Skarban
• [mrtg] How do I autostart mrtg 2.8.12?   Khurram Farhan Hassan
  • [mrtg] Re: How do I autostart mrtg 2.8.12?   Duane Beck
• [mrtg] snmp   Juan A. Becerril Castillo
• [mrtg] Performance data doesn't seem "right" to me...   William Schwartz
  • [mrtg] Re: Performance data doesn't seem "right" to me...   Ron Lyman
• [mrtg] How to Get MRTG working on HPUX 10.20   Arif Patel
• [mrtg] Newbie Cisco/Router Question   Phillip C. Roberts
• [mrtg] Total Utilization of Serial Lines   Strange, Wes
  • [mrtg] Re: Total Utilization of Serial Lines   Doug Hardie
  • [mrtg] Re: Total Utilization of Serial Lines   Ron Lyman
    • [mrtg] Re: Total Utilization of Serial Lines   Alex van den Bogaerdt
      • [mrtg] Re: Total Utilization of Serial Lines   Ron Lyman
• [mrtg] displaying all digits   Drouillard, Ken
• [mrtg] a little off subject..re CISCO IOS   Krell
  • [mrtg] Re: a little off subject..re CISCO IOS   Angel Behar Rodriguez
• [mrtg] Monitoring Fore ASX switches for dropped cells   Dan Wentzel
• [mrtg] Fw: snmp   Ron Lyman
• [mrtg] MTRG 2.8.12 (.png file)   Saknon Kangsumrith
  • [mrtg] Re: MTRG 2.8.12 (.png file)   Tobias Oetiker
• [mrtg] can not use the public community in mrtg   edmundli
  • [mrtg] Re: can not use the public community in mrtg   Glenn Forbes Fleming Larratt
    • [mrtg] Re: can not use the public community in mrtg   Graeme Fowler
• [mrtg] Mrtg errors   Bob McGilvray
• [mrtg] MRTG & Sendmail   Mike Henderson
• [mrtg] Different Graphs...   Per.E.Berger at telia.se
• [mrtg] Re: 3620 and modems in use   Congdon, Christopher
• [mrtg] Index generation   Billingsley, Richard, CON, OASD(HA)/TMA
  • [mrtg] Re: Index generation   Justin Shore
• [mrtg] MRTG Problem   Fabiano Rodrigo Fioratti Cavinatti
• [mrtg] Re: Length of targetline   Paul D. Walker II
• [mrtg] Re: Index generation   Dan Wentzel
• [mrtg] AW: Re: 3620 and modems in use   Michel Renfer
• [mrtg] set mrtg digest   Konrad Szwab
• [mrtg] Ping Probe   Miller Anthony (RBAU/ISY)
• [mrtg] How I do config ports for CISCO 3800   edmundli
• [mrtg] Re: Ping Probe   Jared.Martin at broadwing.com
  • [mrtg] Incorrect byte counts   Doug Hardie
• [mrtg] Re: Ping Probe   Jared.Martin at broadwing.com
• [mrtg] Re: Ping Probe   cpt2 at daimlerchrysler.com
• [mrtg] Thresholds Question....?   Madden, Jay F
• [mrtg] Re: daemon mode   R. Brockway
• [mrtg] Monitoring user processes   Suresh Dussa
• [mrtg] Monitoring Name Servers   Thomas Fleckenstein netkerfi
• [mrtg] Re: Different Graphs...   Paul Nelson
• [mrtg] Re: Ping Probe   Congdon, Christopher
• [mrtg] Re: Ping Probe   Jared.Martin at broadwing.com
• [mrtg] MRTG / SNMP difficulties   Kunc, Doug
• [mrtg] Re: MRTG / SNMP difficulties   Kunc, Doug
• [mrtg] Re: MRTG / SNMP difficulties   Drouillard, Ken
• [mrtg] snmpwalk   Tim Harden
  • [mrtg] Re: snmpwalk   Niels Baggesen
• [mrtg] Newbie Question   Todd Madar
  • [mrtg] upgrading from 2.7.5 to 2.8.12?   Jim Jones, Jr.
    • [mrtg] Re: upgrading from 2.7.5 to 2.8.12?   alex at ergens.op.Het.Net
• [mrtg] Monitoring cpu usage on windows 2000   Mark Hanji
  • [mrtg] Re: Monitoring cpu usage on windows 2000   William Schwartz
• [mrtg] empty graph   Patacsil, Wilson "Jun"
  • [mrtg] Re: empty graph   alex at ergens.op.Het.Net
• [mrtg] Re: empty graph   Patacsil, Wilson "Jun"
• [mrtg] reverse direction of graphs   Iain McBride
  • [mrtg] Re: reverse direction of graphs   Peter W. Osel
  • [mrtg] Re: reverse direction of graphs   Igor Tarasov
• [mrtg] Fw: Problem of cfgmaker   Ban
• [mrtg] Bay Router CPU Utilization   Patacsil, Wilson "Jun"
• [mrtg] Monitoring Harddisk etc.   trin-kln at worldonline.dk
• [mrtg] Monitoring Harddisk etc.   trin-kln at worldonline.dk
• [mrtg] Graphing Foundry BigIron 8000 CPU   Ted Mektrakarn
• [mrtg] SNMP traps fro Win NT   Arnellos Argyris
• [mrtg] OID for Cisco WS-C2924M-XL CPU Load   Billingsley, Richard, CON, OASD(HA)/TMA
• [mrtg] Using an external program as a target   Paul D. Walker II
  • [mrtg] Re: Using an external program as a target   Rob Walker
  • [mrtg] Re: Using an external program as a target   alex at ergens.op.Het.Net
• [mrtg] Need another OID   Billingsley, Richard, CON, OASD(HA)/TMA
  • [mrtg] Re: Need another OID   Martin Ansdell-Smith
• [mrtg] Re: Graphing Foundry BigIron 8000 CPU   Wright, Christopher W, CONTRACTOR Fort Carson
• [mrtg] ATM subinterface Bit Per Second   Dave Packham
  • [mrtg] Re: ATM subinterface Bit Per Second   Dan Schmiedt
    • [mrtg] Re: ATM subinterface Bit Per Second   Jérémy Lacroix
      • [mrtg] Re: ATM subinterface Bit Per Second   Brady A. Tucker
• [mrtg] SNMP v3   afroeland at dansystem.dk
• [mrtg] Re: Using an external program as a target   Stieers, Ken
  • [mrtg] Re: Using an external program as a target   Paul D. Walker II
• [mrtg] Re: Using an external program as a target   Cam Bowman
  • [mrtg] Re: Using an external program as a target   alex at ergens.op.Het.Net
    • [mrtg] Re: Using an external program as a target   Jeff Warnica
• [mrtg] off topic.....recommend a modem rack anyone....   Drouillard, Ken
• [mrtg] TimeZone setting   Billingsley, Richard, CON, OASD(HA)/TMA
  • [mrtg] Re: TimeZone setting   alex at ergens.op.Het.Net
• [mrtg] Re: Using an external program as a target   Cam Bowman
• [mrtg] Re: Using an external program as a target   Roosenraad, Chris
  • [mrtg] Re: Using an external program as a target   lists at ripper.informatik.uni-ulm.de
• [mrtg] Re: TimeZone setting Update   Billingsley, Richard, CON, OASD(HA)/TMA
  • [mrtg] Re: TimeZone setting Update   alex at ergens.op.Het.Net
• [mrtg] Cisco 2501 Memory Utilization....?   Dave Wilson
• [mrtg] Combining MRTG log files ???   Duncan Wallace
• [mrtg] Re: Monitoring cpu usage on windows 2000   Arif Patel
• [mrtg] CFG for Memory Usage   Billingsley, Richard, CON, OASD(HA)/TMA
• [mrtg] fiveminute hack doesn't work in w2k....   Guillermo Krawiec
• [mrtg] Win98 machines in use?   Drouillard, Ken
• [mrtg] Re: Win98 machines in use?   Stieers, Ken
  • [mrtg] Re: Win98 machines in use?   Glenn Forbes Fleming Larratt
• [mrtg] Need OID for Bay Networks Access Node CPU Usage   Jandeep Kang
• [mrtg] Monitoring drive space   Edge
• [mrtg] temperature OID for the Bay Networks Router   Jandeep Kang
• [mrtg] Re: Monitoring cpu usage on windows 2000   Jim Bradbury
• [mrtg] can mrtg run as a service in w2k?   Guillermo Krawiec
• [mrtg] Problems monitoring a Linux box   Nate Carlson
  • [mrtg] Re: Problems monitoring a Linux box   alex at ergens.op.Het.Net
    • [mrtg] Re: Problems monitoring a Linux box   Nate Carlson
  • [mrtg] Re: Problems monitoring a Linux box   Joey Officer
  • [mrtg] Re: Problems monitoring a Linux box   Doug Hardie
  • [mrtg] Re: Problems monitoring a Linux box   Niels Baggesen
    • [mrtg] Re: Problems monitoring a Linux box   Nate Carlson
• [mrtg] How to disconnect a user in a AS5300   Angel Behar Rodriguez
  • [mrtg] Re: How to disconnect a user in a AS5300   Jason Lavoie
  • [mrtg] Foundry FastIron   Corey van Allen
• [mrtg] Per Protocol stats on Cisco   Stokes, Matthew
  • [mrtg] Re: Per Protocol stats on Cisco   Martin Ansdell-Smith
• [mrtg] rateup fatal error.   Suresh Dussa
  • [mrtg] Re: rateup fatal error.   laurent.achouche at st.com
    • [mrtg] Re: rateup fatal error.   Graeme Fowler
• [mrtg] Re: CFG for Memory Usage   Billingsley, Richard, CON, OASD(HA)/TMA
• [mrtg] Basic configuration questions...   Peter Bates
• [mrtg] T-1 Availability   Sottile, Steve
  • [mrtg] Re: T-1 Availability   Pete Templin
• [mrtg] Re: Foundry FastIron   Wright, Christopher W, CONTRACTOR Fort Carson
• [mrtg] help   YILMAZ GULERYUZ
• [mrtg] High Speed If Cisco Mibs Was Re: Help--MRTG Graphing Problem   Jérémy Lacroix
  • [mrtg] Re: High Speed If Cisco Mibs Was Re: Help--MRTG Graphing   Graeme Fowler
    • [mrtg] Re: High Speed If Cisco Mibs Was Re: Help--MRTG Graphing   Jérémy Lacroix
• [mrtg] Re: Basic configuration questions...   Bryan Socha
• [mrtg] error   anthony campobasso
  • [mrtg] Re: error   lists at ripper.informatik.uni-ulm.de
• [mrtg] Cayman 3220   David Gabler
• [mrtg] NT Server 4.0 Modem   cpt2 at daimlerchrysler.com
• [mrtg] bits to bytes "Option(...): bits"   Brock Henry
  • [mrtg] Re: bits to bytes "Option(...): bits"   alex at ergens.op.Het.Net
  • [mrtg] Re: bits to bytes "Option(...): bits"   Chairman of the Bored
• [mrtg] Re: Bay Router CPU Utilization   Andrew Staples
• [mrtg] Re: Bay Router CPU Utilization   Repucci, John (STP)
• [mrtg] Can i plot 3 variables in one graph?   Ellery D. Coleman
  • [mrtg] Re: Can i plot 3 variables in one graph?   alex at ergens.op.Het.Net
    • [mrtg] Re: Can i plot 3 variables in one graph?   Jeff Warnica
• [mrtg] Help needed for enhancing mrtg..   prashanth thumbargudi
  • [mrtg] Re: Help needed for enhancing mrtg..   Tobias Oetiker
• [mrtg] ActivePerl, RRDTool & NT   Jason D. Jordan
• [mrtg] Multiple routers   Todd Madar
• [mrtg] Re: [RE: High Speed If Cisco Mibs Was Re: Help--MRTG Grap   Graeme Fowler
• [mrtg] help   YILMAZ GULERYUZ
• [mrtg] How to monitor traffic on Cisco 675 Routers   Nate Carlson
• [mrtg] Re: ActivePerl, RRDTool & NT   Wim van Weert
• [mrtg] [Off Topic ??] Problem monitoring ASX1000 Cell TX & RX   Jérémy Lacroix
• [mrtg] Problems with mrtg   Colmer, Philip
• [mrtg] slow mode   laurent.achouche at st.com
• [mrtg] MRTG and Nortel ATM   Jones, Brian
• [mrtg] Maximal   Congdon, Christopher
• [mrtg] Re: Multiple routers   Congdon, Christopher
• [mrtg] Re: How to monitor traffic on Cisco 675 Routers   Congdon, Christopher
• [mrtg] Livingston Portmaster 2e   Jack Barnett
  • [mrtg] Re: Livingston Portmaster 2e   Chairman of the Bored
    • [mrtg] Re: Livingston Portmaster 2e (SLOVED!)   Jack Barnett
• [mrtg] Re: slow mode   Matthew Moore (DSL AK)
• [mrtg] Re: How to monitor traffic on Cisco 675 Routers   Chairman of the Bored
• [mrtg] problem polling cpu statistics from solaris 2.6 box running ucd-snmpd   Jason Wright
  • [mrtg] Re: problem polling cpu statistics from solaris 2.6 box running ucd-snmpd   Alex van den Bogaerdt
    • [mrtg] Re: problem polling cpu statistics from solaris 2.6 box running ucd-snmpd   Jason Wright
• [mrtg] Firewall monitoring....   lfiddler at us.ibm.com
• [mrtg] cmd.exe DLL initialization failed   gary chong
• [mrtg] AW: Problems with mrtg   Bankstahl, Jan
• [mrtg] Re: Problems with mrtg   Colmer, Philip
• [mrtg] help on examples provided with mrtg   prashanth thumbargudi
• [mrtg] cfgmaker for catalyst 3200?   ¹qºâ¤¤¤ß ¼B±ê´Ð
• [mrtg] Memotec MIB needed   Laurie Cowcher
• [mrtg] A Scaled or Unscaled question.   viana.gomes at bnpgroup.com
  • [mrtg] Re: A Scaled or Unscaled question.   Alex van den Bogaerdt
• [mrtg] Re: Firewall monitoring....   Martin, Chris A
• [mrtg] Re: How to monitor traffic on Cisco 675 Routers   Vassar, Neil
  • [mrtg] Re: How to monitor traffic on Cisco 675 Routers   Nate Carlson
• [mrtg] Total Memory in Cisco Routers   Billingsley, Richard, CON, OASD(HA)/TMA
  • [mrtg] Re: Total Memory in Cisco Routers   Marc-Adrian Napoli
• [mrtg] Pipeline 130 Frame Relay monitoring   Chuck Renner
• [mrtg] Cisco DS3 sub-interface monitoring   GILMONT Frederic
• [mrtg] trouble graphing cpu load   Jason Steenblik
• [mrtg] Broken graphs   Kleiman Schwarzstein, Sergio
  • [mrtg] NT snmp   Daniel R. Kilbourne
  • [mrtg] Re: Broken graphs   Alex van den Bogaerdt
• [mrtg] Re: NT snmp   Stieers, Ken
• [mrtg] How to keep the M and K from being covered by graphs?   ChgoWinger at aol.com
• [mrtg] Livinston PM2 or PM3 Mibs   Tim Connolly
  • [mrtg] Re: Livinston PM2 or PM3 Mibs   Duane Beck
    • [mrtg] Re: Livinston PM2 or PM3 Mibs   Meade Horne
• [mrtg] converting MIBs into usable OIDs   Tony Bourke
• [mrtg] Experienced users and newbies ...   alex at ergens.op.Het.Net
• [mrtg] Modems In Use,   ozgurcd at koc.net
• [mrtg] Graphs I and Out mix-up   Cyber World Internet Services
  • [mrtg] Re: Graphs I and Out mix-up   alex at ergens.op.Het.Net
• [mrtg] Anyone who can help or has experience with Intel 460T Switches?   Robert Krzykawski
• [mrtg] Re: Cisco DS3 sub-interface monitoring   Archer, Kyle
  • [mrtg] Re: Cisco DS3 sub-interface monitoring   Rob Walker
• [mrtg] cpu util   YILMAZ GULERYUZ
• [mrtg] altering config files to reflect interface change   Paul Nelson
• [mrtg] A Question   Payman N
  • [mrtg] Extracting OIDs   Brian
  • [mrtg] Re: A Question   Kevin Enslow
  • [mrtg] Re: A Question   Joey Officer
  • [mrtg] Re: A Question   Jack Barnett
    • [mrtg] Re: A Question   Justin Shore
• [mrtg] Re: Extracting OIDs   Stieers, Ken
  • [mrtg] Re: Extracting OIDs   Brian
• [mrtg] Re: Extracting OIDs   Drouillard, Ken
  • [mrtg] Re: Extracting OIDs   Brian
• [mrtg] Time Polling < 5 minutes   Fabiano Rodrigo Fioratti Cavinatti
  • [mrtg] More frequent polling?   Brian
• [mrtg] Monitoring BW on Cisco PVC's   Isaac
  • [mrtg] Re: Monitoring BW on Cisco PVC's   Tim Connolly
• [mrtg] Re: Monitoring BW on Cisco PVC's   Congdon, Christopher
  • [mrtg] Re: Monitoring BW on Cisco PVC's   Isaac
    • [mrtg] Re: Monitoring BW on Cisco PVC's   alex at ergens.op.Het.Net
      • [mrtg] Re: Monitoring BW on Cisco PVC's   Isaac
      • [mrtg] Sorry   Isaac
    • [mrtg] 100MB Ethernet ??   Darryl Harvey
• [mrtg] Changing IN and OUT "tags".   Jason Leidigh
  • [mrtg] Re: Changing IN and OUT "tags".   Daniel R. Kilbourne
• [mrtg] Re: Changing IN and OUT "tags".   Stieers, Ken
• [mrtg] Re: Changing IN and OUT "tags".   lfiddler at us.ibm.com
  • [mrtg] Re: Changing IN and OUT "tags".   Greg Tillman
  • [mrtg] baseline info on a Cisco router   Greg Tillman
    • [mrtg] Re: baseline info on a Cisco router   David Gabler
• [mrtg] Re: cmd.exe DLL initialization failed   Javier Tan
• [mrtg] Graph colour!!!   Gerwin Boschloo
• [mrtg] Can MRTG monior Protocol stats for Cisco   edmundli
• [mrtg] Can Daily graphs be kept ?   edmundli
  • [mrtg] Re: Can Daily graphs be kept ?   Justin Shore
• [mrtg] Can MRTG monitor Modem stats (Router)   edmundli
• [mrtg] snmp proxy agent   Suresh Dussa
• [mrtg] Any Nortel Magellan Passport Junkies out there.   Meisner, Jeff D
• [mrtg] 3 questions   YILMAZ GULERYUZ
• [mrtg] CPU/ Memory   Sevald-Olaf.Lund at gjensidige.no
  • [mrtg] Re: CPU/ Memory   alex at ergens.op.Het.Net
• [mrtg] cfg for NORTEL CVX1800 ?   Gerald Fehringer
• [mrtg] new oids   YILMAZ GULERYUZ
• [mrtg] problem related to graph   prashanth thumbargudi
• [mrtg] MRTG and SUN snmpd   Richard van Drimmelen
  • [mrtg] Re: MRTG and SUN snmpd   alex at ergens.op.Het.Net
    • [mrtg] Re: MRTG and SUN snmpd   Richard van Drimmelen
      • [mrtg] Re: MRTG and SUN snmpd   alex at ergens.op.Het.Net
• [mrtg] How to change bytes to bits...?   Cihan Subasi (Garanti Teknoloji)
• [mrtg] Re: How to change bytes to bits...?   Gerald Fehringer
• [mrtg] Re: Change all default graphs (it uses ip.html) to meaning ful xxx.html in mrtg   Stieers, Ken
  • [mrtg] Cisco Gigabit Ethernet   Neil Calvert
    • [mrtg] Re: Cisco Gigabit Ethernet   alex at ergens.op.Het.Net
    • [mrtg] Sv: Cisco Gigabit Ethernet   Nicolai Hanssing
• [mrtg] mrtg timeout values   Kunc, Doug
  • [mrtg] Re: mrtg timeout values   alex at ergens.op.Het.Net
• [mrtg] Anyone monitoring ATM edge devices/uplinks?   Dan Wentzel
  • [mrtg] Re: Anyone monitoring ATM edge devices/uplinks?   prashanth thumbargudi
• [mrtg] SNMP Traps   cpt2 at daimlerchrysler.com
• [mrtg] Re: Extracting OIDs   Rann Sanders
• [mrtg] Change all default graphs (it uses ip.html) to meaningful xxx.html in mrtg   Edmund Li
  • [mrtg] Re: Change all default graphs (it uses ip.html) to meaningful xxx.html in mrtg   Daniel R. Kilbourne
• [mrtg] Monitoring Modem status   Edmund Li
  • [mrtg] Re: Monitoring Modem status   Daniel R. Kilbourne
• [mrtg] Re: Cisco Gigabit Ethernet   alex at ergens.op.Het.Net
• [mrtg] falscher Wert bei Cisco 1x000   Oezdemir Zekeria Kreuzlingen
  • [mrtg] Re: falscher Wert bei Cisco 1x000   Merton Campbell Crockett
• [mrtg] MRTG frisst zu viel Speicher   Oezdemir Zekeria Kreuzlingen
• [mrtg] Re: Can MRTG handle special graphs in special directory   Kostas Marneris
• [mrtg] Help - RRDs.pm   José Manuel Gonçalves
  • [mrtg] Re: Help - RRDs.pm   lists at ripper.informatik.uni-ulm.de
• [mrtg] question   Shao Qun
• [mrtg] urgent !! help needed   Prashant Desai
• [mrtg] Fast question   mariel montufar
• [mrtg] Re: question   Stieers, Ken
  • [mrtg] Re: question   Shao Qun
    • [mrtg] Re: question   Joey Officer
      • [mrtg] Re: question   Shao Qun
• [mrtg] Re: Can MRTG handle special graphs in special directory   Stieers, Ken
• [mrtg] Re: Fast question   Stieers, Ken
• [mrtg] Temp for AS5300   Jason Cowlishaw
• [mrtg] Re: Fast question   Arif Patel
• [mrtg] Re: Can we merge two graphs together and add their total bandwidth usage together in   Arif Patel
• [mrtg] Using MRTG to monitor Total Ras Connections in Windows Nt   Patrick Prue
  • [mrtg] Re: Using MRTG to monitor Total Ras Connections in Window   Graeme Fowler
• [mrtg] Creating my on data input.   Robert McGraw
• [mrtg] 95th % extractor for MRTG+rrd   Jon Rust
• [mrtg] help mrtg config w/ perl   Jim Gallagher
• [mrtg] Re: help mrtg config w/ perl   cpt2 at daimlerchrysler.com
• [mrtg] Can we merge two graphs together and add their total bandwidth usage together in   Edmund Li
  • [mrtg] Re: Can we merge two graphs together and add their total bandwidth usage together in   Jay Hennigan
• [mrtg] Monitoring DHCP address - ISC DHCP server   Cam Bowman
• [mrtg] Can MRTG handle special graphs in special directory   MK Suen
• [mrtg] Graphing question   Dwayne Varey
  • [mrtg] Re: Graphing question   alex at ergens.op.Het.Net
• [mrtg] CPU monitoring on Xylan switch....again.   Sevald-Olaf.Lund at gjensidige.no
  • [mrtg] Re: CPU monitoring on Xylan switch....again.   Jeff Meisner
• [mrtg] stats for modem usage for 3com chessi   Prashant Desai
• [mrtg] Stratacom IGX   Fabiano Rodrigo Fioratti Cavinatti
• [mrtg] Ad: Re: CPU monitoring on Xylan switch....again.   Sevald-Olaf.Lund at gjensidige.no
  • [mrtg] Re: CPU monitoring on Xylan switch....again.   Jeff Meisner
• [mrtg] Configuration file examples for Cisco Hubs and Switches   Ryan Matteson
• [mrtg] OID for cisco 25xx   Nicolas Viers - SCI -
• [mrtg] Ad: OID for cisco 25xx   Sevald-Olaf.Lund at gjensidige.no
  • [mrtg] Re: Taret Line Manipulation   Brian Jones
• [mrtg] Re: Stratacom IGX   Griner, Jeremy
• [mrtg] DELIVERY FAILURE: Error delivering to ejasso; Recipient's Name & Address Book entry does not specify a valid Notes mail file   FROHNA, THOMAS P. (AIT)
• [mrtg] 95th percentile ???   Greg Kennedy
  • [mrtg] Re: 95th percentile ???   David Gabler
• [mrtg] graph update   P Dubberke
  • [mrtg] Re: graph update   Duane Beck
  • [mrtg] Re: graph update   Darryl Harvey
    • [mrtg] Re: graph update   Bradford Woodcock
• [mrtg] Re: 95th percentile?   Henry Steinhauer
• [mrtg] Infos about MIB   Oezdemir Zekeria Kreuzlingen
  • [mrtg] Re: Infos about MIB   alex at ergens.op.Het.Net
• [mrtg] Dividing data by 100   Sebastien BLAISOT
• [mrtg] Cisco 3640 CAR MIB's!   Steven Sporen
  • [mrtg] Re: Cisco 3640 CAR MIB's!   Marc Neuckens
• [mrtg] monitor NES4.0   Suresh Dussa
• [mrtg] max int error   SEGUIN, RONALD
  • [mrtg] Re: max int error   lists at ripper.informatik.uni-ulm.de
    • [mrtg] Re: max int error   SEGUIN, RONALD
      • [mrtg] Re: max int error   Justin Lott
• [mrtg] Adding two OID together   Steven Sporen
  • [mrtg] Re: Adding two OID together   David Gabler
    • [mrtg] What do I need to do to get the ppp0 data?   Darryl Harvey
• [mrtg] my rateup compiles but doesn't work   Michael_Galoppo at haygroup.com
  • [mrtg] Re: my rateup compiles but doesn't work   alex at ergens.op.Het.Net
• [mrtg] Compaq and MRTG   Lars Rune Bjørnevik
• [mrtg] OID   Robert McGraw
• [mrtg] Does any one know the MIB for cisco router 2500 (Modem port) in MRTG.CFG   MK Suen
• [mrtg] OID for memory buffer of Cisco 7200 in MRTG   MK Suen
• [mrtg] Can MRTG monitor different type of traffic from router?   MK Suen
• [mrtg] RunAsDaemon for multiple cfg files   Martin Och
• [mrtg] Re: Compaq and MRTG   mats.karlsson at acnielsen.no
• [mrtg] Getif   Michael Baumann
  • [mrtg] Re: Getif   David C Prall
  • [mrtg] Re: Getif   Michael Baumann
• [mrtg] MRTG for NT   Allan Ayeras
• [mrtg] RTTMON & RTR or SAA   Marc Neuckens
• [mrtg] problem: _jpeg_resync_to_restart   Allan Liblik
• [mrtg] GetSNMPLinesUP.pl   Olivier Gontier
  • [mrtg] Re: GetSNMPLinesUP.pl   alex at ergens.op.Het.Net
  • [mrtg] GetSNMPLinesUP and html   Olivier Gontier
    • [mrtg] MRTG NT Five-minute Service Tool   Mark O'Malley
      • [mrtg] Re: MRTG NT Five-minute Service Tool   Richard Billingsley
    • [mrtg] Re: GetSNMPLinesUP and html   Olivier Gontier
• [mrtg] Re: Getif   Congdon, Christopher
• [mrtg] Ad: Re: CPU monitoring on Xylan switch....again.   Sevald-Olaf.Lund at gjensidige.no
• [mrtg] Two error msg with SNMP using snmpget in the cmd line   siva shanmugam
• [mrtg] Including stats on the actual .PNG image...   Rolen, Mark E.
  • [mrtg] Re: Including stats on the actual .PNG image...   lists at ripper.informatik.uni-ulm.de
• [mrtg] Re: Including stats on the actual .PNG image...   David Gabler
• [mrtg] compiling rateup for nt, part ii   Michael_Galoppo at haygroup.com
• [mrtg] Re: Getif   Chris Graziosi
• [mrtg] Re: 100MB Ethernet ??   Christian Terek
• [mrtg] monitoring a certain user??   Roddy Strachan
• [mrtg] How can I optimiz my index.html   MK Suen
  • [mrtg] Re: How can I optimiz my index.html   Chairman of the Bored
  • [mrtg] Re: How can I optimiz my index.html   Justin Shore
• [mrtg] How do i read the log files??   Meena Srinivasan
• [mrtg] FW: output blue   Maria Elena Christensen (DXD)
  • [mrtg] Re: FW: output blue   alex at ergens.op.Het.Net
• [mrtg] outgoing traffic   Oezdemir Zekeria Kreuzlingen
• [mrtg] calculate the availabilty of a link   Fabiano Rodrigo Fioratti Cavinatti
• [mrtg] Re: 3COM CoreBuilder 5000   Fred
• [mrtg] mrtg on a Cobalt Raq2   Ariel Manzur
• [mrtg] Changing WMY Averages   Copsey M Brian CONT NSLA
• [mrtg] strange problem   Marc Duchesneau
  • [mrtg] Re: strange problem   alex at ergens.op.Het.Net
• [mrtg] changing y minimum   Saulo de Araujo Pereira
  • [mrtg] Re: changing y minimum   Ross Wheeler
  • [mrtg] Re: changing y minimum   alex at ergens.op.Het.Net
• [mrtg] WithPeak Target Option   Copsey M Brian CONT NSLA
• [mrtg] FW: mrtg for NT question   Joe Tang
  • [mrtg] Re: FW: MRTG for NT question   Shao Qun
• [mrtg] Re: FW: mrtg for NT question   mbreton at geiger.com
• [mrtg] graphing disk utilization on Solaris with HostResources MIB   Dan Wentzel
• [mrtg] mrtg-ntap-probe release 0.3.1 - perl5.004 support   Peter W. Osel
• [mrtg] rpms for mrtg 2.8.12 fo RH 6.1 ?   prashant
• [mrtg] system load quickie   Justin Shore
• [mrtg] CPU monitoring   Simone De Antoni
• [mrtg] urgent help needed !!!! please   Prashant Desai
  • [mrtg] Re: urgent help needed !!!! please   Shao Qun
• [mrtg] Re: max int error   lists at ripper.informatik.uni-ulm.de
• [mrtg] RES: calculate the availabilty of a link   Fabiano Rodrigo Fioratti Cavinatti
• [mrtg] MRTG graphs   Keshishian, Vahram
  • [mrtg] Re: MRTG graphs   Tony Bourke
  • [mrtg] Re: MRTG graphs   Justin Shore
• [mrtg] Re: WithPeak Target Option   Dan Wentzel
• [mrtg] Re: max int error   Dan Wentzel
  • [mrtg] Re: max int error   Duane Beck
• [mrtg] lockfile messages?   Dan Swartzendruber
  • [mrtg] Re: lockfile messages?   Justin Shore
  • [mrtg] Re: lockfile messages?   Daniel R. Kilbourne
    • [mrtg] Re: lockfile messages?   Dan Swartzendruber
• [mrtg] Re: lockfile messages?   Justin Shore
• [mrtg] Re: MRTG NT Five-minute Service Tool   Vassar, Neil
• [mrtg] showing a double   Justin Shore
  • [mrtg] Re: showing a double   alex at ergens.op.Het.Net
    • [mrtg] Re: showing a double   prashant
    • [mrtg] Re: showing a double   Justin Shore
• [mrtg] User defined target multiplier option   Meisner, Jeff D
• [mrtg] How to get MIB2SCHEMA.exe ?   Justin B Hobson
• [mrtg] on isdn ÿax . 8k?   Oezdemir Zekeria Kreuzlingen
• [mrtg] problem with work dir HELP!   mariel montufar
• [mrtg] ÿso-8859-1?Q?Re:_[mrtg]_on_isdn_ÿax_._8k??In-Reply-To: <A16FA621ECECD2118C8E0008C709797264E5B4 at NEHER-A003>   Chairman of the Bored
• [mrtg] ISDN/Modems in use on Cisco IOS 12.x   afroeland at dansystem.dk
  • [mrtg] Re: ISDN/Modems in use on Cisco IOS 12.x   Peter W. Osel
• [mrtg] ÿso-8859-1?Q?Re:_[mrtg]_on_isdn_ÿax_._8k??Mime-Version: 1.0   afroeland at dansystem.dk
• [mrtg] Re: so-8859-1?Q?Re:_[mrtg]_on_isdn_ax_._8k??In-Reply-To: <A16FA621ECECD2118C8E0008C709797264E5B4 at NEHER-A003>   Pense, Joachim
• [mrtg] Re: on isdn ax . 8k?   mbreton at geiger.com
• [mrtg] Disappearing Stats   Todd Madar
  • [mrtg] Re: Disappearing Stats   Ryan Chapman
• [mrtg] Re: problem with work dir HELP!   Vassar, Neil
• [mrtg] redhat linux 6.1 problem?   mdaemon at cqm.co.uk
• [mrtg] Re: rpms for mrtg 2.8.12 fo RH 6.1 ?   Arif Patel
• [mrtg] need oid for Lucent Max .. Modems in use   Duane Cox
  • [mrtg] Re: need oid for Lucent Max .. Modems in use   Jim Jones, Jr.
  • [mrtg] Re: need oid for Lucent Max .. Modems in use   Anton Sparrius
    • [mrtg] Re: need oid for Lucent Max .. Modems in use   Anton Sparrius
• [mrtg] Multiple OID's and Arithmetic in .cfg files   Ryan Chapman
• [mrtg] How to get correct IO at With TRUNKING.   Hiroyuki Suzuki
  • [mrtg] Re: How to get correct IO at With TRUNKING.   Dan Schmiedt
• [mrtg] What do I need to do to get the ppp0 data?   Darryl Harvey
• [mrtg] Re: strange problem   Mike Starkweather
• [mrtg] need oid for Cisco 2511 .. Modems in use   Nicolas Viers - SCI -
• [mrtg] Help?   M.Giles
  • [mrtg] Re: Help?   Graeme Fowler
    • [mrtg] Re: Help?   Larry Sheldon
  • [mrtg] Re: Help?   alex at ergens.op.Het.Net
  • [mrtg] Re: Help?   Larry Sheldon
  • [mrtg] How do I graph @ one minute intervals instead of 5 minute.   William Schwartz
    • [mrtg] Re: How do I graph @ one minute intervals instead of 5 minute.   alex at ergens.op.Het.Net
      • [mrtg] Re: How do I graph @ one minute intervals instead of 5 minute.   William Schwartz
      • [mrtg] Re: How do I graph @ one minute intervals instead of 5 minute.   Justin Shore
• [mrtg] Can I monitor BW on Cisco ATM Interface per PVC?   Alberto Mitsuo Sato
• [mrtg] Cisco 7200 Ios12.0 Cpu usage   Barberis Tommy
• [mrtg] Help? prt #2   M.Giles
  • [mrtg] Re: Help? prt #2   Ryan Chapman
• [mrtg] Re: help? prt #2   M.Giles
• [mrtg] Cisco 1600 CPU monitor   Keshishian, Vahram
• [mrtg] config for modems.... please   Duane Cox
• [mrtg] Cisco Memory Graph Issues   Billingsley, Richard, CON, OASD(HA)/TMA
• [mrtg] Re: Cisco 1600 CPU monitor   Jeffery Wagner
• [mrtg] Timeout   Huelskamp, VT
• [mrtg] Re: Timeout   Chairman of the Bored
• [mrtg] Re: Timeout   Stieers, Ken
• [mrtg] off topic CISCO   Krell
  • [mrtg] Re: off topic CISCO   Dan Swartzendruber
    • [mrtg] Re: off topic CISCO   Krell
      • [mrtg] Re: off topic CISCO   Dan Swartzendruber
• [mrtg] Please help   Asim Moin
  • [mrtg] Re: Please help   Daniel R. Kilbourne
• [mrtg] Three Vars   John
• [mrtg] Re: Three Vars   afroeland at dansystem.dk
• [mrtg] About rateup error   Ing. Rolando Romero Acosta
• [mrtg] mrtg on a Cobalt Raq2   Ariel Manzur
  • [mrtg] Re: mrtg on a Cobalt Raq2   Jim Troutman
• [mrtg] Foundry networks BigIron 8000 CPU/MEMORY OID's   Ted Mektrakarn
• [mrtg] Error of rateup   Ing. Rolando Romero Acosta
• [mrtg] gifs and pngs   Cole, Jeff
• [mrtg] Re: gifs and pngs   Arif Patel
• [mrtg] crontab   M.Giles
  • [mrtg] Re: crontab   Dan Swartzendruber
• [mrtg] Cannot create .cfg file   Lars Hecking
  • [mrtg] Re: Cannot create .cfg file   Lars Hecking
• [mrtg] Re: crontab   Rolen, Mark E.
• [mrtg] Graphing IGX trunks   Charl
• [mrtg] need v.35 serial oid on a lucent max box   Duane Cox
  • [mrtg] Re: need v.35 serial oid on a lucent max box   Justin Shore
• [mrtg] cisco pix scripts for mrtg   John McKay
• [mrtg] mrtg rrdtool and NT howto ?   Bear
• [mrtg] RunAsDaemon and target down   Jesper Tim Jacobsen
• [mrtg] Flat lineing...   M.Giles
• [mrtg] Other Traps   Rodolfo Sousa
• [mrtg] how to graph an actual value   Duane Cox
  • [mrtg] Re: how to graph an actual value   Tony Bourke
• [mrtg] need help with NAMED graphing...   Duane Cox
• [mrtg] expecting integer?   Jon Rust
  • [mrtg] Re: expecting integer?   Dan Swartzendruber
    • [mrtg] Re: expecting integer?   Jon Rust
      • [mrtg] Re: expecting integer?   Jay Hennigan
  • [mrtg] Re: expecting integer?   Jay Hennigan
• [mrtg] Modem stats for Cisco 2500   MK Suen
• [mrtg] Can MRTG work through a firewall   MK Suen
  • [mrtg] Re: Can MRTG work through a firewall   Levente Nagy
• [mrtg] Can MRTG monitor squid usage   MK Suen
• [mrtg] Re: Cannot create .cfg file   lists at ripper.informatik.uni-ulm.de
• [mrtg] help: How i can make graphs from a text file with some numbers?   João Pedro Neves
  • [mrtg] Re: help: How i can make graphs from a text file with some numbers?   alex at ergens.op.Het.Net
• [mrtg] comments   Bishop
  • [mrtg] Re: comments   Ryan Chapman
• [mrtg] Re: Graphing IGX trunks   Griner, Jeremy
  • [mrtg] Re: Graphing IGX trunks   Charl
• [mrtg] Re: Graphing IGX trunks   Cihan Subasi (Garanti Teknoloji)
• [mrtg] questions....   Daniel R. Kilbourne
  • [mrtg] Re: questions....   Ryan Chapman
• [mrtg] Re: questions....   Dan Swartzendruber
• [mrtg] Re: questions....   Arif Patel
• [mrtg] finding an OID from a lot of mib files   Duane Cox
• [mrtg] Linux OID!?!   Dan Spray
  • [mrtg] Re: Linux OID!?!   alex at ergens.op.Het.Net
• [mrtg] Where do I obtain SNMPWALK   Goodwin, Bruce
  • [mrtg] help me   Shao Qun
  • [mrtg] Re: Where do I obtain SNMPWALK   Lars Hecking
• [mrtg] order of finding an answer   Duane Cox
  • [mrtg] Re: order of finding an answer   Lars Hecking
• [mrtg] Re: help me   Kostas Marneris
• [mrtg] cpu and swap and Mem usage on redhat 6.1   Prashant Desai
• [mrtg] Oddities   Ashley M. Kirchner
• [mrtg] Re: help me   Aguet Pierre
  • [mrtg] Re: help me   Shao Qun
• [mrtg] Oddities (cont)   Ashley M. Kirchner
• [mrtg] Re: Oddities (cont)   Aguet Pierre
• [mrtg] monitoring memory & cpu usage   Prashant Desai
• [mrtg] memory and cpu usage on RH 6.1   Prashant Desai
• [mrtg] Win 2000 OID   Dan Spray
  • [mrtg] Re: Win 2000 OID   bob at acgco.com
  • [mrtg] Re: Win 2000 OID   William Schwartz
• [mrtg] OIDs and Traps?   Rodolfo Sousa
• [mrtg] ÿso-8859-1?Q?Réf.?ÿ Win 2000 OID   FRAVALO Yvan TPC-SRD
• [mrtg] Re: OIDs and Traps?   afroeland at dansystem.dk
• [mrtg] Re: Where do I obtain SNMPWALK   afroeland at dansystem.dk
• [mrtg] Re: Win 2000 OID   Meissner Sebastian-asm037
• [mrtg] Loading MIBs   Dan Spray
• [mrtg] log files not logging   Chuck.Curto at tmcaz.com
  • [mrtg] Re: log files not logging   Martin Ansdell-Smith
  • [mrtg] Re: log files not logging   alex at ergens.op.Het.Net
• [mrtg] 14all.cgi Does Not Scale Correctly with Bits Option   Vic Summerour
  • [mrtg] Re: 14all.cgi Does Not Scale Correctly with Bits Option   lists at ripper.informatik.uni-ulm.de
• [mrtg] ???? about MRTG on RED HAT 6.1   Itzel Jaramillo
  • [mrtg] Re: ???? about MRTG on RED HAT 6.1   William Schwartz
• [mrtg] Text Value   Rodolfo Sousa
• [mrtg] Re: Text Value   Zaid Ali
• [mrtg] Negative Values??   Ashley M. Kirchner
• [mrtg] Re: Negative Values??   Henry Steinhauer
• [mrtg] no data/files create by MRTG   Joe Tang
• [mrtg] Cisco CIP card OIDs...   Cihan Subasi (Garanti Teknoloji)
• [mrtg] help: Can i tell mrtg to show in the daily graph, data for only o ne day?   João Pedro Neves
• [mrtg] Re: help: Can i tell mrtg to show in the daily graph, data for only o ne day?   afroeland at dansystem.dk
• [mrtg] Interface In & Out Utilization   Darren.Beattie at itnet.co.uk
  • [mrtg] Re: Interface In & Out Utilization   Merton Campbell Crockett
• [mrtg] RH 6.1 HELP!!!   Dan Spray
• [mrtg] KB/Sec vs. Bytes/sec   Joe Tang
  • [mrtg] Re: KB/Sec vs. Bytes/sec   William Schwartz
• [mrtg] Problems with ShortLegend?   Ashley M. Kirchner
• [mrtg] 4 diferent OIDs in one Graph   Rodolfo Sousa
• [mrtg] query   Ashley M. Kirchner
  • [mrtg] Re: query   alex at ergens.op.Het.Net
• [mrtg] From png file to JPEG or ..   Hiroyuki Suzuki
• [mrtg] NNTP.MIB for Win NT 4   Barberis Tommy
• [mrtg] Cisco 3640 Modems in use OID.   Steven Sporen
• [mrtg] Odd MRTG Behaviour   Jason Jordan
  • [mrtg] Re: Odd MRTG Behaviour   Graeme Fowler
• [mrtg] Using Enterprises MIB   Paul D. Walker II
  • [mrtg] Re: Using Enterprises MIB   Graeme Fowler
    • [mrtg] Re: Using Enterprises MIB   Paul D. Walker II
• [mrtg] ??? About indexmaker..   Itzel Jaramillo
  • [mrtg] Re: ??? About indexmaker..   Kruepke
  • [mrtg] Re: ??? About indexmaker..   Jay Hennigan
• [mrtg] Re: Using Enterprises MIB   David Botham
• [mrtg] Can't locate RRDs.pm in @INC   Peter Lalor
  • [mrtg] Re: Can't locate RRDs.pm in @INC   Graeme Fowler
    • [mrtg] Re: Can't locate RRDs.pm in @INC   Peter Lalor
• [mrtg] How much is too much?   Sottile, Steve
  • [mrtg] Re: How much is too much?   Bradford Woodcock
    • [mrtg] Re: How much is too much?   alex at ergens.op.Het.Net
      • [mrtg] Re: How much is too much?   Bradford Woodcock
  • [mrtg] Re: How much is too much?   Steffen Kluge
• [mrtg] RunAsDaemon   Jeff Donovan
• [mrtg] Re: How much is too much?   Rolen, Mark E.
  • [mrtg] Re: How much is too much?   Kruepke
• [mrtg] Help. MIB ASCEND   Mario Marquez
• [mrtg] Monitoring Ethernet Collisions   Leonardo Rodrigues
• [mrtg] B/s   Chuck.Curto at tmcaz.com
  • [mrtg] Re: B/s   Ryan Chapman
  • [mrtg] Re: B/s   Ashley M. Kirchner
    • [mrtg] getting ppp0 stats via serial port on RH Linux?   Darryl Harvey
    • [mrtg] Re: B/s   Ryan Chapman
      • [mrtg] Re: B/s   Ashley M. Kirchner
• [mrtg] Calculations   Chuck.Curto at tmcaz.com
  • [mrtg] Re: Calculations   Ashley M. Kirchner
• [mrtg] Re: Odd MRTG Behaviour   Jason D. Jordan
• [mrtg] Need to change X-AXIS for ONE HOUR(INSTEAD OF 33 Hours)!!!   prashanth thumbargudi
• [mrtg] Compiling Rrdtool 1.0.13   Jessie Bryan
  • [mrtg] Re: Compiling Rrdtool 1.0.13   lists at ripper.informatik.uni-ulm.de
• [mrtg] Cisco OID Problems   Gerwin Boschloo
  • [mrtg] Re: Cisco OID Problems   Ryan Chapman
• [mrtg] Re: How much is too much?   Sottile, Steve
• [mrtg] Can MRTG work on Win95/98?   Atul Patel
  • [mrtg] Re: Can MRTG work on Win95/98?   Ziggy Bialzik
• [mrtg] Synoptics Lattishub   Ziggy Bialzik
• [mrtg] Re: Can MRTG work on Win95/98?   Congdon, Christopher
• [mrtg] Re: Need to change X-AXIS for ONE HOUR(INSTEAD OF 33 Hours )!!!   David Botham
• [mrtg] Re: How much is too much?   Henry Steinhauer
• [mrtg] RunAsDaemon and Cron????   Jeff Donovan
  • [mrtg] SNMP + win NT + Proxy   David Gabler
    • [mrtg] Re: SNMP + win NT + Proxy   Rodolfo Sousa
• [mrtg] WithPeak changes to wmy reported values   FROHNA, THOMAS P. (AIT)
• [mrtg] Installing CMU-SNMP   David Botham

Last message date: Fri Mar 31 23:10:06 MEST 2000
Archived on: Wed Jan 24 10:43:24 MET 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...